Samsung SHR-5082 User Manual page 64

Camera Connection Indication
Window
The window displays the connection state of
DVR and the connected cameras.
 Yellow: When Smart Viewer is
successfully connected to a DVR. When
the camera is connected for monitoring.
 Black: When Smart Viewer cannot be
connected to a DVR.
 Blue: When Smart Viewer can connect
to a DVR but it is disconnected now.
Screen Split Selection Buttons
The buttons present modes like full screen,
single, 4-split, 9-split, and 16-split modes.
You can change to any of them under
monitoring.
Sequence Mode Button
When this button is selected, screens are
switched at a preset interval. The interval can
be set in Monitoring of Setup Menu. In Single
Mode, the channel numbers are sequentially
switched from 1 to 16. In Quad (4-split) Mode,
the screens are changed like 1st 4 channels
(1,2,3,4) --> 2nd 4 channels (5,6,7,8) --> 3rd
4 channels (9,10,11,12) --> 4th 4 channels
(13,14,15,16). In 9-split Mode, the screens are
changed from 9 channels (1,2,3,4,5,6,7,8,9) to
7 channels (10,11,12,13,14,15,16). In 16-split
Mode, the screen refreshes at the preset interval.
60_ Smart Viewer
SHR-5162_Eng.indb 60
Monitoring State Display
The screen split status and playing status are
displayed on the screen.
: When monitoring in Quad Mode
: When monitoring in Single Mode
: Cameras are turned Off
The numbers in the screen icons indicate
the screen positions in Smart Viewer.
: The orange icon indicates that the current
channel is connected to a specific camera.
: The gray icon indicates that the current
channel is connected to a camera but not
displayed in the screen.
: The black icon with a slash indicates that
the current channel is not connected to
any camera.
2007-06-18 ｿﾀﾀ・11:50:08