Samsung SHR-5082 User Manual page 62

If the network password of a DVR differs from
the connection password set in Smart Viewer,
a login message appears to let you input the
correct password manually.
2. Duplicate Admin user connection
When the DVR that you want to connect to has
been already occupied by an Admin user but
you retry connection with the Admin privilege,
the previously connected session is automatically
disconnected.
The system allows simultaneous access
to DVR by up to 3 users, which include
one Admin privilege user and 2 user
privilege users. (But in case of Multicast,
up to 5 users are allowed.)
Once occupied by 3 users, the DVR
does not permit more connection.
CAUTION
Connection Screen
58_ Smart Viewer
SHR-5162_Eng.indb 58
If you change the settings such as
video size and color quality while
CAUTION
Smart Viewer is running, Smart Viewer
may fall into an unexpected state. In
this case, you must terminate Smart
Viewer.
Mode Conversion Button
These buttons enables you to switch between
Monitoring mode and Search mode.
Time Information
When Smart Viewer is connected to a DVR,
the current date, day, and time of the DVR are
displayed. Otherwise, the current date, day, and
time of your PC are displayed.
Connection Information
When Smart Viewer is connected to DVR, the
connection button will display the connection
status.
If you click the connection button again, the DVR
is disconnected.
OSD Information Display
1
6 5
1. The channel number, camera name, and
video size are displayed. Available video
sizes are (C)CIF, (N)Normal, and (L)Large.
2. If the video data of the current channel is
being recorded on your PC, REC appears
on the screen.
2 3
4
2007-06-18 ｿﾀﾀ・11:50:03