Samsung SHR-5082 User Manual page 53

- Storage Setup
It displays the information of the HDD that
is contained in your DVR. Also you can
determine whether or not to repeat recording
and make a beep sound when any disk
failure happens.
SHR-5162_Eng.indb 49
- Remote Control Device
You can configure the settings for the
remote control that is installed in the DVR
system. You can toggle between On and
Off. The remote control ID can be set among
0 to 99.
If you have directly installed the remote
control in the DVR system and activated
the setup, PTZ controls are not enabled
using Smart Viewer.
 Camera
You can configure the camera-related settings.
For more details, see Chapter 5, "Menu Setup."
- Camera Configuration.
This configures the camera-related settings
such as video/audio availability, camera title,
and auto sequencing interval for the DVR.
 Only English is available for the title.
If you enter the title in your local
CAUTION
language and apply it, a warning
message appears to ask you to
retype it.
 You can input the title up to 15
digits.
 If you leave the title blank, a warning
message appears to ask you to
retype it.
Smart Viewer _49
2007-06-18 ｿﾀﾀ・11:49:39