Reset; Exit; Troubleshooting - Samsung SDZ-370 Series User Manual

Operating Your Camera
Press SET button.
3
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0 1 2 3 4 5 6 7 8 9 ( )
< >-/#¬S!?,.
←→ CLR POS END
You can enter up to 20 characters.
4
a. Move the cursor to the character entry field using the LEFT or RIGHT button.
b. Use UP, DOWN, LEFT and RIGHT buttons to select a desired character.
c. Press the SET button to confirm selection of the blinking character. The character
is then saved, and the cursor in the entry field moves to the next position.
d. Repeat steps a through c until the desired name has been entered.
Notes
• Correcting Mistakes
Move the cursor th 'CLR' and press the SET button to clear the entire entry. To modify one
character, use LEFT or RIGHT to position the cursor above the character to be modified and
click the SET button after selecting the character to enter.
Enter a title, move the cursor to 'POS' and press
5
the SET button. The entered title appears on the
screen. Select the position to display the title on the
screen by using the 4 direction butons and press
the SET button.
When the position is determined, select.
• CAM ID : Displays camera ID on top left corner of the screen.
• CAM INFO : Displays camera information on screen.
• MOTION ALARM : You can toggle the use of the camera alarm.
• ZOOM MAG : Use th is feature to display the current zoom magnification level
on screen. Position the indicator over 'ZOOM MAG' using the
36
COLOR CCD CAMERA
FRONT DOOR
User's Manual
UP or Down button. Then set to ON using the LEFT or RIGHT
button.
• LANGUAGE : You ca n select the menu language according to your
requirements (Korean, ESPANOL, FRANCAIS, ITALIANO,
DEUTSCH, ENGLISH, Japanese, Chinese)
• END : Select this to save the SPECIAL menu settings and return to the
SPECIAL menu.

RESET

To reset your camera to factory default condition.

EXIT

To finish setup menu.

Troubleshooting

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
• Nothing appears on the screen.
- Check that the power cord and line connection between the camera and monitor are
fixed properly.
- Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• The image on the screen is dim.
- Is lens stained with dirt? Clean your lens with soft, clean cloth.
- Set the monitor to proper condition.
- If the camera is exposed to too strong light, change the camera position.
COLOR CCD CAMERA
37
User's Manual