Backlight - Samsung SDZ-370 Series User Manual

Operating Your Camera
✽ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Sel ect this when the color temperature is between 1800ºK and
10500ºK
INDOOR : Select this when the color temperature is between 4500ºK and 8500ºK.
OUTDOOR : Sel ect this when the color temperature is between 1800ºK and
10500ºK. (sodium light inclusion)
AWC →SET : To f ind the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press the
SET button. If the environment changes, readjust it.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tune the White Balance and then press the SET button.
WHITE BAL MANUAL SETUP
RED
BLUE
▶END
Press SET to Return
Notes
• W hite Balance may not work properly under the following conditions. In this case select
the AWC mode.
When the color temperature of environment surrounding the subject is out of the control
1
range
When the ambient illumination of the subject is dim.
2
If the camera is directed towards a fluorescent light or is installed in a place where
3
illumination changes dramatically, the White Balance operation may become unstable.
16
COLOR CCD CAMERA
117
|
||||||| ||||||||||||||||||
93
|
||||| ||||||||||||||||||||
User's Manual

BACKLIGHT

This camera is designed so that it delivers a distinctive subject and background at
The same time, even when the subject is in backlight, unlike conventional cameras,
By adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Up
and Down buttons so that the arrow indicates 'BACKLIGHT'.
MAIN SETUP
WHITE BAL
BACKLIGHT
MOTION DET
2. Select a desired mode using the Left and Right buttons depending on the camera pupose.
BLC : En ables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC(High Light Compensation) : If there is a high light installed in dark environment
such as an apartment parking garage or gas
station entrance, removing the high light makes
it possible to view car license plates efficiently.
HLC MASKING AREA
HLC ON
COLOR CCD CAMERA
ATW
OFF
OFF
HLC OFF
17
User's Manual