Download Print this page

Specifications - Sanyo VCB-3384 - 1/3" B/W CCD Camera Specifications

1/3” high resolution b/w ccd camera

Advertisement

VCB-3384
Features
• 1/3-Inch CCD Image Sensor, with approx.
410,000 picture elements.
• High Sensitivity, minimum required
illumination is 0.07 Lux @ F1.2 Lens.
(Incandescent lighting)
• High-Resolution. More than 570 Lines of
Horizontal Resolution.
• Equipped with Electronic Iris.
• Backlight Compensation.
• External Sync. (VS) (75 Ohms/High
Impedance, Selectable Internally)
• Line Lock/Internal Sync
• CS Mount Lens Compatible
• Flange-Back adjustable externally.
• Built-In Auto Iris Level control circuit for DC
type Auto Iris lens.
• Both DC type and VIDEO type Auto Iris lenses
applicable.
• 12V DC/24V AC operation.
• Versatile use and very compact.
• Metal cabinet.
• Low power consumption and quick start.
• No interference from magnetic or
electrostatic field.
• Built-In Anti-Ground loop Isolation
Transformer.

Specifications

MODEL
VCB-3384
Scanning System
EIA Standard: 525 lines, 30 Frames/Sec
Image Device
Interline Transfer Method CCD
Image Size
1/3" (Approx. 4.8mm x 3.6mm)
Picture Element
811 (H) x 508 (V): All Picture Elements
768 (H) x 494 (V): Effective Picture Elements
Synchronizing System
Line Lock/Internal Synchronization (Manually Switched)/External
External Sync.
1.0V p-p/75 Ohms
Interlace
Automatic PLL 2:1 Interlace
Resolution
Horizontal:
Video Output Level
1.0 Vp-p (75 Ohms, Composite)
More than 50 dB
Video S/N Level
Scene: 0.07 Lux @ F1.2 Lens
Minimum Illumination
(Incandescent Lighting)
0.45 Fixed
Gamma Correction
ON/OFF, Manual Switching, Center Zone Light-Measuring System
Backlight Compensation
CS Mount
Lens Mount
12.5mm
Flange-Back Adjustment
1/4" - 20 UNC x 2 (Top/Bottom)
Camera Mount
V Phase Adjust.
Control
Lens Iris Level
Lens Type
Backlight Compensation BLC: ON/OFF
Video
Sockets
External Sync.
Auto Iris Lens
Power Supply
0.07 Lux to 42,000 Lux
Electronic Iris Range
Light Control
Electronic Iris or Optional Auto Iris Lens
Auto Iris Output and
DC: Iris Control Coil Only Type Lens (Galvanometric Iris without
Connection
Amplifier Type)
VIDEO: DC Power & Video Signal Supply Auto-Iris Type Lens
(With Amplifier Type)
+12V DC (Max. 50mA), Video (High Impedance), Ground
Environmental Conditions
Operating
Storage
LED
Power Indicator
24V AC / 60Hz, 12-15V DC
Power Requirement
Approx. 3.0W (w/o Auto-Iris Lens)
Power Consumption
2.24 x 1.77 x 4.78 inches (57 x 45 x 121.3mm)
Dimensions (W x H x D)
(w/o Lens Mount and Camera Mount)
0.53 lb (245g) (w/o Lens)
Weight
Specifications subject to change without notice.
©2003 SANYO Security Video
570 TV Lines
±
0.5mm
Line Phase
Level: L,H
E.I./DC/Video
Video Out
VS In
Lens Out
24V AC, GND
F1.2, Lens
Drive Coil ( +, -), Brake (Damp) Coil ( +, -)
Socket Pin No. 1
Brake Coil -
Brake Coil +
Socket Pin No. 2
Drive Coil +
Socket Pin No. 3
Socket Pin No. 4
Drive Coil -
+ 12V DC
Socket Pin No. 1
Socket Pin No. 2
NC
Socket Pin No. 3
Video (1.0 Vp-p)
Socket Pin No. 4
Ground (for Power)
Temperature: 14°F to 122 °F (-10°C to 50°C)
Humidity: Within 90% RH
Temperature: -4°F to 140 °F (-20°C to 60°C)
Humidity: Within 70% RH
SANYO Security Products
21605 Plummer Street
Chatsworth, CA 91311
Phone: (888) 893-7403
Fax: (888) 818-2597
Technical Support: (888) 66-SANYO
www.sanyocctv.com
VR
(Rear)
VR
(Side)
Slide Sw.
(Side)
Dip Sw.
(Side)
BNC
BNC
4-Pin
(Side)
3-Pin Terminal

Advertisement

loading