> ID DISPLAY.
CAMERA ID SETUP
CAMERA ID
>
ID POSITION
UP-LEFT
PREVIOUS PAGE .
>ID POSITION
>SHARPNESS
>BRIGHTNESS
26
Select ON to open the CAMERA ID SETUP
screen where you can add a CAMERA ID (title) of
up to 8 characters.
Press & or '
on the joystick to
(>) to CAMERA ID. Then press # or $ on the
joystick to navigate to the character position. Use
& or ' to change the character, then press # or
$ on the joystick to move to the next character.
When you are satisfied, press down on the
joystick to exit the character entry mode. Press &
or '
on the joystick to move
another item.
Select where you want the Camera ID to appear
on the monitor screen. Select from:
<UP-LEFT>, <UP-CENTER>, <UP-RIGHT>,
<DOWN-LEFT>, <DOWN-RIGHT>
Select the level of sharpness of the image.
Choices are:
<NORMAL>
<SHARP>
<SOFT> (default)
While observing the video monitor, move the
cursor to adjust the overall brightness level, from
80 to 130 (110 is the default).
move the cursor
the cursor to