Honeywell HD3UЧж User Manual page 21

> CUSTOM.
SLOW SHUTTER SETUP
>
SHUT MODE
PREVIOUS PAGE .
AUTO SHUTTER--SHUT PRI
>
LIMIT
0
PREVIOUS PAGE .
>SYNC
LINE LOCK
>
V PHASE
0
PREVIOUS PAGE .
>AGC
Document 800-05018 Rev A
11/09
Opens the SLOW SHUTTER SETUP menu where
you select the optimum exposure adjustment.
Shutter mode options are:
AUTO..
AUTO (Gain Priority) to select the sensitivity LIMIT
from 0 to 60 (26 is the default). See the figures on
the left.
MANUAL to manually set the sensitivity LIMIT from 0
!
26 60 to 60 (26 is the default).
Synchronize the vertical interval sync pulse of your
camera with other equipment to reduce the effect of
picture roll on the monitor. Select either:
!
519 624 <INTERNAL> (default) for cameras using DC
power or when line lock is not required, or
<LINE LOCK> to open the Line Lock screen where
you can adjust the Vertical Phase (V PHASE) from 0
to 624 (519 is the default).
Automatic Gain Control. This setting affects the day/
night threshold. A higher AGC value results in the
camera switching from day to night mode at lower
light levels. Adjust the level of gain applied to the
video signal in low light conditions. The default is 40.
21