Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Brymen BM817s
Summarization of Contents
Safety Information
Terms and Definitions
Defines WARNING and CAUTION terms used in the manual for user safety.
Meter Protection Standards
Specifies meter protection ratings and standards like IEC/UL/EN61010.
Measurement Categories
Explains Measurement Categories (CAT IV, III, II) as per IEC61010-1.
General Safety Precautions
Contains specific warnings for electrical safety, test leads, and fuses.
CENELEC Directives
Lists conformity to CENELEC directives for low-voltage and EMC compliance.
Product Description and Panel Overview
Panel Layout
Identifies and describes the main physical components of the DMM.
Display and Controls
Details the LCD display, push-buttons, and rotary selector.
Input Terminals
Explains the function of the various input jacks for different measurements.
Operation and Functions
Pre-Operation Safety Check
Advises testing voltage function on a known source before hazardous measurements.
Voltage and Frequency Functions
Explains how to use DC Voltage, AC Voltage, and Hz Frequency measurement functions.
Capacitance and Diode Test
Describes performing capacitance and diode tests, including capacitor discharge warning.
Temperature Measurement
Explains how to use the temperature measurement function for specific models.
Resistance and Continuity
Describes using resistance and continuity functions, including a safety caution.
Resistance Calibration
Explains the auto calibration feature for resistance measurements.
Current Measurement
Details how to perform micro-amp, milli-amp, and amp current measurements.
PC Data Communication
Explains the PC-COMM interface and required kits for data transfer.
MAX/MIN Recording Mode
Describes the 50ms MAX/MIN recording mode and its operation.
CREST Capture Mode
Explains the 0.8ms CREST capture mode for instantaneous peak values.
Display Backlight
Explains how to control the LCD backlight and its auto-off feature.
Display Hold Function
Describes how to freeze the displayed reading using the HOLD function.
Zoom Analog Pointer
Explains the 5x zoom feature for enhanced analog pointer resolution.
Relative Measurement Mode
Explains how to use the relative zero offset feature for measurements.
Ranging Modes
Describes how to select and switch between manual and auto-ranging.
Input Connection Warnings
Details the Beep-Jack warning and how to set the beeper off.
Auto Power Off (APO)
Explains the automatic power off feature and how to disable it.
Maintenance and Troubleshooting
Maintenance Safety
Lists safety warnings to follow before performing any maintenance.
Calibration and Diagnostics
Recommends periodic calibration and explains self-diagnostic messages.
Cleaning and Storage
Provides instructions for cleaning and properly storing the meter.
Troubleshooting
Offers basic steps for diagnosing and resolving instrument failures.
Battery and Fuse Replacement
Details the types of batteries and fuses and how to replace them.
Limited Warranty Information
Warranty Coverage
Outlines the terms of the product warranty, exclusions, and duration.
Warranty Service Procedure
Explains how to obtain warranty service and contact information.
Legal Disclaimers
States warranty limitations, including exclusion of consequential damages.
Need help?
Do you have a question about the BM817s and is the answer not in the manual?
Questions and answers