Table of Contents
Advertisement
ELITE
SERIES
Owner's Guide
For Model:
ca1555E
Deluxe Vehicle Security and
Keyless Entry System with 2 Way Confirming
LCD Remote Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2019 Voxx Electronics Corporation. All rights reserved.
1
Advertisement
Table of Contents
Related Manuals for Code Alarm ca1555E
Summarization of Contents
Using Your Remote Control
Arming the Security System
Instructions for arming the vehicle security system.
Passive Arming Bypass
How to temporarily bypass passive arming.
Bypassing The Shock Sensor
Steps to bypass the shock sensor for one arm cycle.
Hidden Alarm Function
Activate silent alarm mode.
Disarming the Security System
Instructions for disarming the security system.
Two Stage Door Unlock (Optional)
Unlock driver's door first, then all doors.
Activating the Trunk Release Feature (Optional)
Open vehicle trunk or hatch remotely.
Activating the AUX 1 Output (Optional)
Activate AUX 1 function, e.g., window control.
Entering AUX Mode and Activating the Additional AUX 2 - 5 Outputs (Optional)
Access and control additional AUX outputs via transmitter.
Using the Progressive Car Finder Feature
Locate vehicle using lights and sound.
Using the Personal Protection Alarm (Panic)
Activate personal protection/panic alarm.
Programmed Transmitter Notification
LED flashes indicate programmed transmitters.
Valet Mode
Enable/disable system functions for service.
User Selectable Notification Chirps
Toggle system arm/disarm chirps ON or OFF.
User Selectable LED
Control the status LED's ON/OFF state.
Manually Overriding the Security System
Bypass alarm without transmitter.
Carjack Mode (Anti-Hijack Mode)
Activate anti-hijack protection.
Status LED, Light Flashes and Siren/Horn Indications
Status LED Flash Indications
Meaning of different LED flash patterns.
Siren/Horn Chirp Indications
Meaning of different siren/horn chirp patterns.
Parking Light Flash Indications
Meaning of different parking light flash patterns.
Additional 2-Way LCD Remote Control Functions
Check Vehicle Status
View vehicle status on LCD remote.
Display Illumination
Control remote display illumination.
Melody/Vibration Mode
Select remote feedback mode (melody or vibration).
Button Beeps
Toggle remote button beep sounds ON or OFF.
Battery Save Mode
Activate remote power saving mode.
Clear Flashing Icons and Melody Sound
Reset LCD screen icons and sounds.
Stopping LCD Trigger Melody
Stop melody if system triggered without disarming.
Button Lock
Lock/unlock remote buttons to prevent accidental presses.
Illumination
Toggle remote display illumination when receiving/sending.
2 Car Mode
Control a second security system with the remote.
Parking Meter Countdown
Set a countdown timer for parking meters.
Adjusting the Clock and Timer Settings
Configure clock, alarm clock, and countdown timer.
Replacing Remote Control Batteries
4 Button Remote Control - Model CAT4ME
Procedure to replace batteries in the 4-button remote.
2 Way LCD Remote Control - Model CATLCDE
Procedure to replace batteries in the LCD remote.
Programming Replacement Remote Controls
Remote Transmitter Programming
Steps to program new or replacement transmitters.
Transmitter programming for 2 Car Mode - LCD remote only
Programming transmitters for dual vehicle control.
Need help?
Do you have a question about the ca1555E and is the answer not in the manual?
Questions and answers