Loosen the focus controller to adjust the focus range from Near to
S
5
TEP
Infinity. Upon completion, tighten the focus controller.
Attaching the Dome Cover
The supplied screwdriver is exclusively designed to match the dome
screws. In case you need to adjust the camera at a later time, do not
discard the screwdriver.
Route all the cables through the base channel under the camera.
S
1
TEP
Use the two L-shaped audio cables when you route the cables to
T
IP
prevent having to remove a tab.
(Optional) Remove the tab (or tabs) from the dome cover to
S
2
TEP
accommodate the cables. To avoid injury, place the pliers in the
middle of the tab and pull outward.
Attach the dome cover to your Cisco VC 220 camera.
S
3
TEP
VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide
Tighten
Zoom
Focus
Loosen
W
T
N
13