Batch Scanning In Ariel 3.0 - Konica Minolta MS6000 MK II Installation And User Manual

button is pressed, the Status W
displayed in th e scanning application.
Note : I mages scanned via the Batch Scanning Mode are not permanently stored but
rather k ept in temporary memory by the application software. Therefore the number of
scans that can be stored will be dependent on image file sizes, the application itself as
well as available system memory.

Batch Scanning in Ariel 3.0

It is no t recommended to use version 5.0.1.7b with Ariel Software. It is recommended that
you use TWAIN version 2.0 for Ariel scanning.
Docum ent Settings
Book m ode document scanning must be selected to enable the automatic erase position
detectio n for center erase function.
Docum ent Height lets you define the thickness of the document to b
Book m ode m ust be disabled. Deselect book mode to enable sheet mode.
Gloss o f original lets you define the gloss of paper for the document to be scanned.
Maskin g and Centering
The Frame Masking setting will detect black (or darkly shaded) areas around the border of an
image a nd convert these pixels to match the image's background.
Finger Masking setting will require frame masking be enabled. Finger Masking will remove
the fing er image from the scan area.
Centeri ng setting will require frame masking be enabled.
The Pr eview Window
indow and Driver UI will close and all image data will be
e scanned in sheet mode.