Table of Contents
Advertisement
VPI/VCI: the VPI and VCI values provided by your ISP. Do not change them unless it was
required by your ISP.
DSL Link Type: Select a DSL Link Type which is provided by your ISP. The options include
EoA (it is for PPPoE, IPoE, and Bridge), PPPoA (PPP over ATM) and IPoA (IP over ATM).
Encapsulation Mode: The mode of the data processing over the Link Type you have
selected. Uses the default setting, if you are not sure.
Service Category: Select the type of the service assigned by your ISP in the drop-down list.
The default type is UBR Without PCR.
Connection Mode: Select the connection mode for EoA option of DSL Link Type. The
options include Default mode for single service over one connection, VLAN MUX Mode for
multiple Vlan service over one connection, and MSC Mode for Multiple Service over one
connection.
Enable Quality of Service: If you want to adopt QoS (Quality of Service) for the connection,
please select check box.
TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
Figure 4-3
18
Advertisement
Table of Contents
