Table of Contents
Advertisement
Log in to the Router, click the "Advanced Setup-NAT" menu on the left of your browser, and
click the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New, then on
the "Add or Modify a Virtual Server" page, enter use "80" as service port, and your IP
address next to the "Server IP Address", assuming 192.168.1.188 for an example, and
remember to click the Save/Apply button.
Note:
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
Router, you will be prompt to change the WEB management port number to avoid
interference.
5.
The wireless stations cannot connect to the Router.
1)
Make sure the "Enable Wireless Router Radio" is checked.
2)
Make sure that the wireless stations' SSID accord with the Router's SSID.
TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
99
Advertisement
Table of Contents
