Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Honey Bee AirFLEX AF236
Summarization of Contents
1.6 - Set Cutting Height and Adjusting During Harvest
1.6.1 - RIGID MODE: Divider Sensors
Adjust cutting height in RIGID mode using divider sensors.
1.6.2 - RIGID MODE: Subframe Sensors
Adjust cutting height in RIGID mode using subframe sensors.
1.6.3 - FLEX MODE: Cutter Bar Sensors:
Adjust cutting height in FLEX mode using cutter bar sensors.
1.7 - Combine Calibrations in the Field
1.7.1-RIGID MODE: Divider Sensors:
Perform field calibration in RIGID mode with divider sensors.
1.7.2 - RIGID MODE: Subframe Sensors:
Perform field calibration in RIGID mode with subframe sensors.
1.7.3 - FLEX MODE: Cutter Bar Sensors:
Perform field calibration in FLEX mode with cutter bar sensors.
Need help?
Do you have a question about the AirFLEX AF236 and is the answer not in the manual?
Questions and answers