Related Manuals for Siemens 6DD1607-0AA2
Summarization of Contents
Definitions and Support
1.1 Definitions
Defines key terms and concepts used in the manual, including general information and qualified personnel.
1.2 Support
Details how to get additional support and information from Siemens via online resources.
Product description
2.1 Application module FM 458-1 DP
Overview of the main application module, its features, specifications, and technical data.
2.1.1 Updating the Firmware of FM 458-1 DP
Instructions for upgrading the module's firmware to the latest version.
2.1.3 Performance features
Details the key computational and memory performance specifications of the module.
2.1.5 Connections
Outlines the various physical interfaces and their assignments for connectivity.
2.1.8 Technical data
Comprehensive list of technical specifications, including electrical and physical data.
2.2 I/O expansion module EXM 438-1
Details the EXM 438-1 module for I/O expansion, its features, and connections.
2.3 Communications expansion module EXM 448
Describes the EXM 448 module for PROFIBUS-DP communication.
2.4 Communications expansion module EXM 448-2
Describes the EXM 448-2 module for SIMOLINK drive bus and master functions.
Mounting
3.1 Mounting the expansion modules
Step-by-step instructions for physically installing expansion modules.
3.2 Installing the assembly into the SIMATIC subrack
Procedure for installing the assembled modules into the SIMATIC subrack.
3.3 Application information and noise immunity
Provides important notes on noise immunity and operational considerations.
Configuring
4.1 Freely configuring the FM 458-1 DP application module
Introduces software components and graphic configuration for the FM 458-1 DP.
4.2 Configuring and parameterizing the components
Details the process of hardware configuration and parameter setting in STEP 7.
4.3 Coupling to the SIMATIC S7-CPU
Describes methods for data transfer and communication between the FM 458-1 DP and the S7-CPU.
4.4 PROFIBUS DP coupling
Covers configuration and usage of PROFIBUS DP for communication.
4.6 SIMOLINK drive coupling
Details the SIMOLINK protocol for serial data transfer using fiber-optic cables.
4.7 Table function
Describes how to use tabular values in software applications.
4.8 Parameter access technique for D7-SYS
Explains how to access and manage parameters using D7-SYS.
4.9 WinCC connection to FM458-1 DP channel
Covers the process of configuring WinCC access to FM458-1 DP process variables.
Assembly guidelines
5.1 Installation and EMC guidelines
Guidelines for installation and ensuring electromagnetic compatibility (EMC).
5.1.1.2 Danger and warning information
Explains the meaning of danger, warning, and caution symbols and messages.
5.1.2 Introduction
Provides an introduction to EMC and its importance for the system.
5.1.4 Mounting and operation
Guidelines for mounting and operating the subracks and modules.
5.1.6 Cables
Guidelines for proper installation and shielding of cables.
5.1.10 Protective grounding
Explains the procedure for protective grounding of the system.
5.2 ESD guidelines
Safety guidelines for handling Electrostatic Discharge sensitive components.
5.3 Ambient conditions
Information on environmental conditions for operation, including air intake temperature.
Need help?
Do you have a question about the 6DD1607-0AA2 and is the answer not in the manual?
Questions and answers