Related Manuals for Siemens 6DD1607-0AA1
Summarization of Contents
Definitions and Support
1.1 Definitions
Defines key terms like 'Qualified person' and provides general manual information.
1.2 Support
Provides information on obtaining support and additional resources via the Siemens internet portal.
Product description
2.1 Application module FM 458-1 DP
Details the specifications, order numbers, compatibility, and features of the FM 458-1 DP module.
2.1.1 Updating the Firmware
Explains when and how to update the FM 458-1 DP module's firmware using an MMC card.
2.1.2 Application and design
Describes the module's use in high-performance control applications and its expansion modules.
2.1.3 Performance features
Lists computational power, memory capacity, interfaces, and other performance specifications.
2.1.5 Connections
Illustrates the physical connections for PROFIBUS DP, serial interface, and binary inputs.
2.1.6 Status displays
Explains the meaning of the module's eleven LEDs for operating status and diagnostics.
2.2 I/O expansion module EXM 438-1
Details the EXM 438-1 module's features, connections, and technical specifications for I/O expansion.
2.3 Communications expansion module EXM 448
Describes the EXM 448 module for PROFIBUS-DP communication as master or slave.
2.4 Communications expansion module EXM 448-2
Details the EXM 448-2 module for SIMOLINK drive bus and MASTERDRIVES option modules.
Mounting
3.1 Mounting the expansion modules
Provides step-by-step instructions and combinations for mounting expansion modules together.
3.2 Installing the assembly into the SIMATIC subrack
Details the procedure for installing the pre-mounted module assembly into the SIMATIC S7-400 subrack.
Configuring
4.1 Freely configuring the FM 458-1 DP application module
Explains software requirements like STEP 7, CFC, and graphic configuring for module setup.
4.2 Configuring and parameterizing the components
Guides through hardware configuration in HWConfig and parameterizing modules via dialog fields.
4.3 Coupling to the SIMATIC S7-CPU
Describes methods for data transfer and diagnostic interrupts between FM 458-1 DP and S7-CPU.
4.4 PROFIBUS DP coupling
Covers general characteristics and configuration steps for PROFIBUS DP communication.
4.6 SIMOLINK drive coupling
Explains the SIMOLINK protocol for serial data transfer using fiber-optic cables.
4.9 WinCC connection to FM458-1 DP channel
Details configuring WinCC access to process variables via TCP/IP, MPI, and PROFIBUS DP.
Assembly guidelines
5.1 Installation and EMC guidelines
Covers general installation practices, EMC requirements, and safety considerations.
5.1.1 Definitions
Defines 'Qualified person' and provides safety and warning information.
5.1.4 Mounting and operation
Provides guidelines for subrack installation, module insertion, and operational safety.
5.1.6 Cables
Details requirements for shielding, cable lengths, routing, and connections for signal cables.
5.2 ESD guidelines
Provides essential guidelines for handling electrostatic discharge sensitive modules.
5.3 Ambient conditions
Details information regarding ambient conditions and air intake temperature for self-cooling.
Need help?
Do you have a question about the 6DD1607-0AA1 and is the answer not in the manual?
Questions and answers