Related Manuals for Lenze E82MV152
Summarization of Contents
Safety Information and Warnings
Electrostatic Discharge (ESD) Hazard
Warning about handling electrostatically endangered components.
General Safety Guidelines
General safety guidelines and responsibilities for qualified personnel.
Intended Use and Compliance
Defines the product's intended use and relevant directives like EMC and Low Voltage.
Transport, Storage, and Installation
Guidelines for safe handling, storage, and installation of the drive converters.
Electrical Connection and Operation
Instructions for electrical connection and safe operation of the drive converters.
Maintenance and Servicing Procedures
Procedures for maintenance and servicing, emphasizing manufacturer's documentation.
Installation and Mounting Guide
Motor and Gearmotor Mounting Overview
Illustration of mounting the motec unit with a motor or geared motor.
Packing List for Mounting Kits
List of components included for wall and motor mounting kits.
Wall Mounting Procedure
Step-by-step instructions for mounting the unit to a wall.
Motor Connection for Wall Mounting
Specifics on connecting the motor when the unit is wall-mounted.
Motor Mounting Procedure
Instructions for physically attaching the unit to the motor.
Motor Connection for Motor Mounting
Specifics on connecting the motor when the unit is motor-mounted.
Electrical Connections and Interfaces
Mains Connection and Wiring
Details on connecting the mains power, including fuses and cable cross-sections.
Internal Accessory Connections
Guide to connecting internal accessories like terminal strips and modules.
Control Cable Shielding and Routing
Proper methods for shielding and routing control cables for signal integrity.
Standard I/O Control Interface
Configuration and connection details for standard digital and analog I/O signals.
Application I/O Control Interface
Configuration and connection details for application-specific digital and analog I/O signals.
Lenze Parameter Configuration
Operating Behaviour and Limit Value Settings
Configuration of operating parameters, limit values, and frequency settings.
Motor Data and Identification Setup
Setting motor parameters and performing motor identification for optimal performance.
Analog Signal Input/Output Configuration
Configuring analog inputs and outputs, including offsets and gains.
Digital Signal and Output Configuration
Setting up digital inputs, outputs, and monitoring functions.
Display, Diagnostics, and Service Parameters
Parameters for display, diagnostics, service functions, and fault handling.
Need help?
Do you have a question about the E82MV152 and is the answer not in the manual?
Questions and answers