Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Teledyne Lecroy HVD3605A
Summarization of Contents
Introduction
Compatibility and Firmware
Probe compatibility with oscilloscopes and required firmware versions for proper function.
Safety
Safety Symbols and Precautions
Explains safety symbols and general precautions for probe usage.
Operating Environment
Details temperature, humidity, altitude, and usage conditions for the probes.
HVD310xA Probes
HVD310xA Specifications
Presents detailed specifications including bandwidth, risetime, voltage ranges, and sensitivity.
HVD3206A Probes
HVD3206A Specifications
Details specifications for HVD3206A and HVD3206A-6M probes, including bandwidth and voltage limits.
HVD3220 Probes
HVD3220 Specifications
Lists specifications for the HVD3220 probe, including bandwidth, risetime, and voltage ranges.
HVD3605A Probes
HVD3605A Specifications
Presents specifications for the HVD3605A probe, including bandwidth, voltage ranges, and CMRR.
Performance Verification Procedure
Required Equipment
Lists test equipment and accessories required for probe performance verification.
Preliminary and Certification Procedures
Outlines preliminary setup steps and the certification procedure for probe verification.
Checking Probe Attenuation
Details the process of checking probe attenuation using the MAUI Automation Browser.
Operation
Connecting Probe to System
Guides on connecting the probe to the oscilloscope and the circuit under test.
Using Oscilloscope Display
How the probe's settings are adjusted and displayed on the oscilloscope.
Offset Function
Explanation of the offset function for DC bias removal.
AC Coupling
Usage of AC coupling to remove DC component from signals.
Bandwidth Limiting
How to adjust the probe's bandwidth limit setting.
Voltage Range Settings
Options for setting probe attenuation relative to oscilloscope V/div.
Overload Indicator and Auto Zero
How overload is indicated and the function of the Auto Zero feature.
Maintenance
Cleaning and Calibration
Procedures for cleaning the probe and information on calibration interval.
Service and Returns
Covers probe servicing, return process, and ordering replacement accessories.
Reference and Compliance
Technical Support and Definitions
Provides technical support contact information and definitions for relevant standards.
Certifications and Safety Compliance
Details product certifications, EMC compliance, safety standards, and environmental compliance.
Need help?
Do you have a question about the HVD3605A and is the answer not in the manual?
Questions and answers