Table of Contents
Advertisement
A
A
Brake circuit - Bleeding
If the system has been dismantled for repair, or if faults are
detected in the brake system, the air in the hydraulic circuit can be removed
using the bleeders (A).
Once the air has been removed from the system, replace the rubber cap
on the bleeder to prevent dirt from entering the system.
Front fork – Oil level
Each of the suspension struts is filled with
SAE 7,5 oil. The oil level should be at 120mm +/-2.5
measured from the upper edge of the suspension strut.
-26-
Hide quick links:
Advertisement
Table of Contents
