Related Manuals for Intel RealSense ID Solution F455
Summarization of Contents
Hardware Details and Components
Host Interconnect
Details data and power interfaces, including UART, USB2, and pin configurations for host connectivity.
Optical System Components
Describes the camera setup, sensor types, perspective, and IR illuminators like LEDs and projectors.
Thermal Specifications and Considerations
Covers operating and storage temperature limits for F450/F455 modules and component thermal considerations.
Firmware Upgrade Parameters
Details the firmware update mechanism, supported features like signed firmware, and rollback protection.
Mechanical Design and Dimensions
Mechanical Dimensions and Tolerances
Provides key dimensions (X, Y, Z) and tolerances for F450 modules and F455 peripherals.
Cover Glass and Optical Isolation
Specifies cover glass transmissivity requirements and optical isolation for maintaining performance.
Orientation and System Tilt
Defines acceptable module orientation (0/180 degrees) and system tilt angles for optimal face detection.
Heat Sink Design Recommendations
Discusses thermal management, recommending a 2s cycle mode and potential need for a heat sink.
Software and Facial Authentication
Intel RealSense SDK for Facial Authentication
Introduces the SDK library for facial authentication capabilities on F450 and F455 modules.
Face Authentication Metrics and Performance
Details functional, authentication (FAR/TAR), and performance metrics like latency.
System Integration and Design
Product Assembly Recommendations
Provides recommendations for module assembly to ensure camera and illumination specifications are met.
Optical Assembly and Handling
Explains procedures for handling and assembling the module, including cover glass protection and dust prevention.
User Sensing and Trigger Heuristics
Describes the trigger mechanism and user sensing parameters like field of view and path.
User Feedback Implementation
Details audio and visual feedback scenarios for authentication success, failure, and device status.
Regulatory Compliance
System Laser Compliance and Safety
States the product is a Class 1 Laser Product and includes certification and caution statements.
US FDA Accession Number
Provides the U.S. FDA accession number for the Intel® RealSense™ ID Solution F450/F455.
Manufacturer and Regional Contact Information
Lists manufacturer details and single points of contact for EU and UK regions.
FCC Part 15 Declaration of Conformity
Details FCC compliance statements for Class B digital devices, including installation and interference measures.
Country-Specific Regulatory Compliance
Covers compliance statements for Canada, European Directives, Australia, Japan, South Korea, and Customs Union.
Ecology Compliance and RoHS Declarations
Includes China RoHS declaration and information on Waste Electrical and Electronic Equipment (WEEE).
Need help?
Do you have a question about the RealSense ID Solution F455 and is the answer not in the manual?
Questions and answers