Setting Up Your Scanner To Work With Paperport - Xerox XDM1525D-WU User Manual

Setting Up Your Scanner to Work with PaperPort

DocuMate 152 Scanner User's Guide
When you selected a scanning option from the Scanner drop-down
list, either TWAIN: Xerox DocuMate 152 or WIA: Xerox
DocuMate 152, the Scan button at the bottom of the panel should
become active. If it doesn't, you need to set up your scanner to
work with the selected option.
If this Scan button is not active,
you need to setup your scanner.
NOTE: Setting up your scanner is a one-time-only process for
each option from the Scanner drop-down list. Therefore, you
may have to set up your scanner once each for TWAIN: Xerox
DocuMate 152 and WIA: Xerox DocuMate 152. The setup
process, described below, is the same for each option. You will
not have to set up the scanner again for an option unless you
uninstall the scanner and PaperPort software, then re-install
them.
Scanning from PaperPort
93