Advertisement
Advertisement
Table of Contents
Related Manuals for AAVIK I-580
Summarization of Contents
AMPLIFIER LAYOUT
Front Panel Overview
Identifies and describes the buttons on the front of the amplifier.
Rear Panel Overview
Identifies and describes the connectors on the rear of the amplifier.
FRONT PANEL FUNCTIONS
Display Functionality
Explains the information shown on the front panel display.
Standby Mode Operation
Details how to enter and exit standby mode.
Mute and Remote Pairing
Describes muting speakers and pairing a remote control.
Navigation and Volume Control
Explains using navigation buttons and the volume knob.
REAR PANEL FEATURES AND CONNECTORS
Speaker Terminals
How to connect speaker cables using spade or banana plugs.
Pre Out and Line Inputs
Describes pre-amplifier outputs and audio source inputs.
Power and Data Connections
Details power inlet, RS-232, and trigger output connections.
REMOTE CONTROL AND SYSTEM RESET
Remote Control Operation
Explains the functions of each button on the remote control.
Factory Reset Procedure
Step-by-step guide to reset all amplifier settings to default.
MENU SETTINGS AND CONFIGURATION
Input Gain and Balance Settings
How to adjust preamp gain and audio balance for inputs.
Pre Out Mute and Display Brightness
Settings for muting pre-outs and adjusting display brightness.
ADDITIONAL MENU SETTINGS
Display Dimming and Temperature
Controls display auto-off and shows amplifier temperature.
Software Version and Home Theatre Bypass
Displays firmware and configures home theatre bypass mode.
Need help?
Do you have a question about the I-580 and is the answer not in the manual?
Questions and answers