Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AAVIK C-300
Summary of Contents for AAVIK C-300
- Page 1 C-300 Preamplifier User’s guide...
- Page 2 C-300 Preamplifier User’s guide Specifications: Contents: SPECIFICATIONS Page 2 Output: Max 7.5Vrms unbalanced (RCA) or 15Vrms balanced (XLR) Distortion, line stage: <0.003% (THD at 1kHz, 1Vrms input) SAFETY INSTRUCTIONS Page 3 Output impedance: 50 ohms (unbalanced) or 100 ohms (balanced)
- Page 3 Safety instructions The equipment should be serviced by qualified service personnel 1. Read these instructions. The preamplifier should be serviced by qualified service personnel when: 2. Keep these instructions. A. the power-supply cord or the plug has been damaged, or B.
- Page 4 C-300 Preamplifier User’s guide Front panel CARTRIDGE LOADING ADJUSTMENT With the RIAA/phono input selected in the source indicator (5), press and hold the mute button (1) for more than three seconds to enter cartridge loading adjustment mode. The volume display will change to having only a single LED lit, to indicate that cartridge loading adjustment mode is activated.
- Page 5 (6), when navigation loading mode. The button needs to be held for more than five seconds to your remote control with the C-300 amplifier, press and hold the navigation mode (3) is activated.
- Page 6 (not in standby mode), the trigger outputs will supply 12VDC. The C-300 amplifier is equipped with one RCA phono input. The phono to select sample rates as high as 384kHz. The PCM DAC in the C-300 They can each supply up to 100mA.
- Page 7 VOLUME UP LINE OUTPUTS Press this button to increase the volume setting. The C-300 amplifier is equipped with a single ended (RCA) and a balanced VOLUME DOWN (XLR) line output. Both outputs can be used simultaneously. Press this button to decrease the volume setting.
- Page 8 www.aavik-acoustics.com...
Need help?
Do you have a question about the C-300 and is the answer not in the manual?
Questions and answers