Page 1
P OW ER AMP LIFI ER USER GUIDE: P-280 / P-580...
Page 2
THE EQUIPMENT SHOULD BE SERVICED BY QUALIFIED SERVICE PERSONNEL 1. Read these instructions. 8. Unplug this apparatus during lightning – Take care that objects do not WARNING storms or when unused for long periods fall and liquids are not spilled into the 2.
Page 3
BUTTONS ON THE FRONT OF THE AMPLIFIER CONNECTORS ON THE BACK OF THE AMPLIFIER CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
The display will When changing settings (see “MENU FUNCTIONS” do this, proceed as follows: show ”Mute” instead of the the standard “Aavik”. page 6), the display will show the setting being changed. Switch off the amplifier at the main power...
The power inlet accepts power cables with an IEC 60320-C13 female connector. To ensure the best performance, please consult your Aavik Acoustics dealer for a suitable mains cable. RS-232 WARNING: To reduce the risk of fire or electric shock, do not expose the TRIGGER amplifier to rain or moisture.
MENU FUNCTIONS To enter the menu, press and hold the navigation button for 3 seconds. When entering the menu, the gain setting will be shown on the display. The top line of the display shows the current option (“Gain” when entering the menu), and the bottom line shows the current setting. Press the navigation button to cycle through the options.