Fujitsu 5015C - fi - Sheetfed Scanner Operator's Manual page 27

•
Documents that are not square or rectangular
•
Very thin documents
Do not use the following documents:
•
Paper-clipped or stapled documents
•
Documents on which the ink is still wet
•
Documents other than paper such as fabric, metal foil, or transparencies
•
When scanning semi-transparent documents, slide the [Brightness] bar
HINT
to light to avoid bleed through.
•
To prevent the rollers from becoming dirty, avoid scanning documents
containing large areas written or filled in pencil. If scanning of such doc-
uments is unavoidable, clean the rollers frequently
•
Carbonless paper contains chemical substances that may damage the
ATTENTION
Pad ASSY or rollers (e.g. Pick roller) when these types of documents
are fed. Pay attention to the following:
Cleaning:
If pick errors occur frequently, clean the Pad ASSY.
For details on cleaning the Pad ASSY, refer to "3.2.3 Cleaning the
ADF" on page 39.
Replacing parts:
The service lives of the Pad ASSY and Pick roller ASSY are some-
times shortened when scanning medium-grade paper documents.
•
When documents of Wood containing paper are scanned, the life of
Pad ASSY and Pick roller ASSY may be shorter compared with the
case where the manuscript of Woodfree paper is scanned.
When using the ADF, the leading edge of all document sheets must be
HINT
evenly aligned. Make sure that curling at the leading edge is within the
following tolerances:
2.2 Loading Documents on ADF
More than 30mm
Less than
3mm
Top of the paper
Less than
5mm
Top of the paper
fi-5015C Image Scanner Operator's Guide
Feed direction
Read surface
Feed direction
Read surface
2
13