Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux TT500
Summarization of Contents
Instructions for Use
Diagram of Tumble Dryer
Provides a visual overview of the tumble dryer components.
Manual Operational Guide
Details the operation of the tumble dryer using manual controls.
Manual Operation with RMC
Explains operation using residual moisture control for optimized drying.
Coin Operation
Guides on operating the tumble dryer using coin insertion for payment.
Central Control Panel Operation
Describes operating the dryer via a central control panel interface.
Maintenance Procedures
Outlines daily, quarterly, and annual maintenance tasks for the dryer.
General Installation
Reversing Door Installation
Instructions on how to change the dryer door from right-hinged to left-hinged.
Setup for Models 300/30 and 500/50
Covers unpacking and initial positioning for specific dryer models.
Setup for Model 750/75/650
Details unpacking and positioning for the 750/75/650 dryer models.
Tumble Dryer Evacuation System
Discusses the fresh air requirements for optimal dryer performance.
Shared Evacuation Pipe Installation
Guidelines for installing shared exhaust pipes for several dryers.
Air Principle and Evacuation Ducting
Explains the air flow within the dryer and exhaust system design.
Error Codes
Lists and explains the error codes displayed by the machine.
Running Hours Counter
Details how the machine tracks and displays its operational hours.
Installation - Electric, Steam, and Gas Heating
Dimension Sketch
Provides a visual representation of the dryer's physical dimensions.
Technical Data by Model
Detailed technical specifications for 300/30, 500/50, and 750/75/650 models.
Electric Installation for 300/30 and 500/50
Instructions for connecting the electrical supply for 300/30 and 500/50 models.
Electric Installation for 750/75/650
Instructions for connecting the electrical supply for the 750/75/650 model.
Electric Installation Function Check
Steps to verify correct electrical installation and operation.
Electric Heating Fuse Specifications (Type 300/30)
Details fuse sizes, effects, and voltages for 300/30 electric heating.
Steam and Gas Heating Fuse Specifications
Details fuse sizes, effects, and voltages for steam and gas heating.
Electric Heating Fuse Specifications (Type 500/50)
Fuse specifications for electric heating on 500/50 models.
Electric Heating Fuse Specifications (Type 750/75/650)
Fuse specifications for electric heating on 750/75/650 models.
Steam Installation Procedures
Step-by-step guide for connecting the steam heating system.
Gas Installation Procedures
General guidelines for installing the gas heating system.
Gas Installation Testing and Conversion
Procedures for testing gas connections and converting gas types.
Gas Pressure and Adjustment Tables
Tables detailing gas pressure and adjustments for different regions and gas types.
Parameter Programming
Programming Mode Overview
Explains the purpose and access to the machine's programming mode.
Switching to Programming Mode
Step-by-step guide to enter the programming mode.
Adjustable Parameters List
Lists all adjustable parameters and their ranges.
Control Panel in Programming Mode
Describes how to use the control panel for parameter adjustments.
Machine Types and Variants
Details available machine types and their programming variants.
Temperature Setting Parameters
Instructions for adjusting temperature parameters for different programs.
Time Setting Parameters
Instructions for adjusting time-related parameters.
Reversing Parameter Setting
Instructions for adjusting the drum reversing parameter.
Cooling Time Parameter Setting
Instructions for adjusting the cooling time parameter.
Residual Moisture Level Parameters
Instructions for setting residual moisture levels for programs.
Extra Drying Time Parameters
Instructions for setting extra drying time for programs.
Residual Moisture Level Measurement Principle
Explains the principle behind residual moisture level measurement.
Quick-View Parameter List
Provides a summary of factory default parameter settings.
Need help?
Do you have a question about the TT500 and is the answer not in the manual?
Questions and answers