Table of Contents
Advertisement
Quick Links
Multi Format Switcher System
XVS-8000 System
(With ICP-X7000 Integrated Control Panel)
XVS-8000
XKS-S8165
XKS-8460
XZS-8520
ICP-X7000
MKS-X7018
MKS-X7023
MKS-X7032
MKS-X7041
MKS-X2700
User's Guide
Software Version 2.10 and Later
1st Edition (Revised 2)
XKS-S8110
XKS-T8165
XKS-8470
XZS-8530
MKS-X7075
MKS-X7019
MKS-X7024
MKS-X7033
MKS-X7042
MKS-X7700
[English]
XKS-T8110
XKS-8210
XZS-8200
XZS-8540
MKS-X7011
MKS-X7020
MKS-X7026
MKS-X7035
MKS-X7701
XKS-8160
XKS-8440
XZS-8510
XZS-8550
MKS-X7017
MKS-X7021
MKS-X7031TB
MKS-X7040
MKS-X7702
Advertisement
Table of Contents
Related Manuals for Sony MKS Series
Summarization of Contents
Chapter 1 Overview
Introduction
Describes the functions and operation of the XVS-8000 Multi Format Switcher system.
Features
Details the principal features of the XVS-8000 system.
Main Functions
Details the core functions of the switcher system.
Image Data Management and Operation
Covers saving, recalling, and managing image data, keyframes, snapshots, and utility functions.
Setup
Explains system setup operations, including system, panel, and switcher configurations.
Chapter 2 Menus and Control Panel
Names and Functions of Parts of the Control Panel
Identifies and describes the components of the control panel.
Cross-Point Control Block
Details the function of the cross-point control block for signal selection.
Transition Control Block
Explains the transition control block for executing common and independent key transitions.
Independent Key Transition Control Block
Describes the independent key transition control block.
Flexi Pad Control Block
Explains the use of the Flexi Pad control block for various operations.
Key Control Block
Details the key control block for adjusting and modifying keys.
Device Control Block (Trackball)
Explains the device control block for controlling external devices.
Numeric Keypad Control Block
Describes the numeric keypad control block for various operations.
AUX Bus Control Block
Details the AUX Bus control block for bus signal selection and router operations.
Menu Panel
Explains the menu panel used for menu operations.
Chapter 3 Signal Selection and Transitions
Signal Selection
Explains signal selection using cross-point buttons and AUX bus control block buttons.
Transitions
Details the process of switching from current video to new video using transitions.
Independent Key Transitions
Describes configuring independent transitions on each keyer.
Key Priority Settings
Explains how to check and change the overlay sequence (key priority).
Chapter 4 Keys
Overview
Defines a key as an effect replacing part of the background image.
Key Types
Explains how the key source signal is used to cut out the background.
Key Modifiers
Details applying borders and other modifiers to the edge of the key image.
Mask
Explains using masks to hide parts of the background or key.
Key Memory
Describes automatically storing keyer settings for recall.
Key Setting Operations (Menu)
Details making key settings using menus.
Chroma Key Adjustments
Explains methods for adjusting the composite obtained from chroma keying.
Key Edge Modification
Details modifying the edge of the key image.
Key Adjustments (Key Control Block)
Details making adjustments to keys using the key control block.
Chapter 5 Wipes
Overview
Explains wipes as a function to switch from current to new image using a pattern.
Types of Wipe Pattern
Classifies wipe patterns into standard, enhanced, rotary, mosaic, and random/diamond dust.
Basic Wipe Setting Operations
Details wipe setting operations using the Wipe menu.
Pattern Mix
Explains creating new patterns by combining two selected patterns.
Setting Wipe Modifiers
Details applying modifiers like wipe direction and pattern position.
Basic Independent Key Transition Wipe Setting Operations
Describes operations for independent key transition wipe settings.
Wipe Snapshots
Explains saving and recalling wipe pattern snapshots.
Chapter 6 DME Wipes
Overview
Defines DME wipes as effects using DME effects to switch images.
Types of DME Wipe Patterns
Classifies DME wipe patterns into preset and user programmable.
DME Wipe Restrictions
Details restrictions related to DME wipes.
Basic DME Wipe Setting Operations
Describes DME wipe setting operations using the DME Wipe menu.
Selecting a DME Wipe Pattern
Explains how to select a DME wipe pattern.
Adjusting DME wipe pattern parameters
Details adjusting parameters for DME wipe patterns.
Modifying a DME wipe pattern edge (Edge)
Describes modifying the edge of a DME wipe pattern.
Setting the DME wipe pattern position (Positioner)
Explains setting the position of the DME wipe pattern.
Setting the DME wipe pattern size (Size)
Details setting the size of the DME wipe pattern.
Adjusting the DME wipe pattern cropping (Crop)
Explains adjusting the cropping of the DME wipe pattern.
DME Wipe Modify Clear
Resets DME wipe settings to their initial status.
Basic Independent Key Transition DME Wipe Setting Operations
Describes operations for independent key transition DME wipe settings.
Selecting an Independent Key Transition Wipe Pattern
Explains selecting standard wipe patterns for independent key transitions.
Setting Independent Key Transition DME Wipe Modifiers
Details adding modifiers to independent key transition DME wipes.
Specifying the DME wipe direction (Direction)
Explains how to specify the DME wipe direction.
Chapter 7 Frame Memory
Overview
Explains frame memory as a function to freeze and capture images.
Frame memory storage area
Describes the two storage areas: volatile memory and non-volatile storage.
Frame Memory Image Data
Details the two types of image data: still image and clip.
Frame memory input and output
Explains the two lines for frame memory input and 20 output channels.
Frame Memory Operations
Details operations for frame memory, including preparations.
Still Image Operations
Explains operations for creating and recalling still images.
Creating a Still Image (Freeze)
Details capturing a still image and saving it in memory.
Recalling Still Images
Explains recalling still image files in memory.
Clip Operations
Details operations for creating and playing clips.
Creating a Clip (Recording)
Explains capturing a clip and saving it in memory.
Playing a Clip (Menu)
Describes playing a clip recalled on an FM output from the menu.
Playing a Clip (device control block)
Describes playing a clip recalled on an FM output using the device control block.
Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
Color Backgrounds
Explains color backgrounds for creating color background video.
Basic Color Background Setting Operations
Details making single-color matte and color combination settings.
Copy and Swap
Explains copying or swapping settings between banks or keyers.
Misc Menu
Covers setting DME override and safe title area.
Setting DME Override (DME Forced Select Mode)
Explains selecting the DME override operation mode.
Setting the Safe Title Area
Describes enabling/disabling the safe title area for each output.
Displaying a List of Transition Rates and Changing the Settings
Explains displaying and changing transition rates.
Aux Menu
Explains configuring the color corrector for an AUX bus.
Setting the Color Corrector for an AUX Bus
Details setting video process, primary color correction, and RGB clip.
Chapter 9 Special Functions
Overview
Introduces special functions like side flags and multi program 2.
Side Flags
Explains side flags referring to areas left and right of an image.
Side Flag Settings
Details settings for side flag video material and operation.
Multi Program 2
Explains subdividing M/E hardware to create separate main and sub video outputs.
Overview
Introduces Multi Program 2 mode for creating separate main and sub outputs.
Multi Program 2 Mode Settings (Basic Operation)
Details basic operations for Multi Program 2 mode.
Assigning output signals for Multi Program 2 mode
Explains assigning output signals for Multi Program 2 mode.
Assigning main/sub to switcher banks
Describes assigning main and sub to switcher banks.
Multi Program 2 Mode Settings (Other Operations)
Details other operations for Multi Program 2 mode.
Assigning transition control block buttons to main/sub
Explains assigning transition control block buttons to main/sub.
M/E Configuration Switching (M/E Split)
Describes subdividing an M/E board into two for use.
Chapter 10 DMEs
Overview
Explains DME for adding 3D effects like movement and rotation.
About DME Boards
Details the XKS-8470 HD DME board.
XKS-8470 HD DME board
Describes the HD DME board with four channels.
Transforms in Three-Dimensional Space (Transforms)
Explains the process of placing video images in 3D space for manipulation.
Three-dimensional space
Defines source space and target space for images.
Source space and target space
Explains the coordinate systems for source and target space.
Local space and global space
Defines local space coordinates and global space.
Three-dimensional parameters
Defines X, Y, and Z values defining image position and rotation.
Valid values of three-dimensional parameters
Shows valid ranges for transform parameters.
Transform Operation Modes
Lists available operation modes for DME transforms.
Move image (Location XYZ)
Explains moving the image on the X, Y, or Z axes.
Graphics Display
Allows display of wire frames, coordinate axes, and grids for DME effects.
Special Effects
Details various special effects that can be added using DME.
Edge effects
Describes applying borders, CG borders, crop, beveled edges, art edges, flex shadows, etc.
Applying Special Effects (Common Operations)
Describes common operations for applying special effects.
Applying Special Effects (Edge Effects)
Details applying special effects related to edges.
Applying Special Effects (Effects on the Overall Signal)
Describes applying effects to the entire signal.
Applying Special Effects (Nonlinear Effect Settings)
Details applying nonlinear effects that change image shape.
Chapter 11 External Devices
Control of External Devices
Explains controlling P-Bus, GPI, VTRs, disk recorders, and Extended VTRs.
Shared Functions for External Device Control
Details keyframe functions and saving to registers.
Keyframe functions
Lists available keyframe functions.
Saving to registers
Explains saving set data to a register as keyframe effect data.
Control of P-Bus Devices
Explains controlling P-Bus external devices via SIU 9-pin serial port.
Creating and Editing the P-Bus Timeline
Describes setting actions at keyframe points on the P-Bus timeline.
Control of GPI Devices
Explains controlling GPI devices through the GPI output port of an SIU.
GPI timeline
Details setting actions at keyframe points on the GPI timeline.
GPI output port settings
Sets the GPI output port number for SIU outputting GPI pulses.
Control of VTRs, Disk Recorders, and Extended VTRs
Explains manual operations and timeline settings for VTRs, disk recorders, Extended VTRs.
Controlling the Tape/Disk Transport
Details controlling tape or disk transport using operation buttons.
Variable playback speed modes
Describes playing back material at variable speed.
Recording to VTRs and disk recorders
Explains recording to VTRs or disk recorders.
Displaying VTR/Disk Recorder/Extended VTR Information
Shows device number, register number, status, current time, start point, stop point, etc.
Chapter 12 Keyframes
Regions
Defines a region as a functional block of the system.
Keyframes
Explains keyframes as loaded video conditions at a point in time.
Saving and Recalling Effects
Details creating new effects, editing existing ones, and saving them.
Effect Attributes
Describes special conditions attached to effects, like dissolve and auto transition.
Effect Editing
Explains operations for editing keyframes: insert, delete, modify.
Duration modes
Explains variable and constant duration modes for keyframe editing.
Time Settings
Details setting keyframe durations and effect durations.
Paths
Defines path as the specification of how interpolation is carried out between keyframes.
Displaying the Timeline Menu
Explains how to view keyframe effects on the timeline.
Interpreting the Timeline Menu
Describes the main parts of the timeline menu screen.
Timeline Menu Display Settings
Explains how to restrict regions shown on the timeline.
Recalling a Register
Describes recalling registers using the numeric keypad control block.
Recalling a Register (Numeric Keypad Control Block)
Details recalling registers via the numeric keypad.
Register selection in the numeric keypad control block
Explains selecting target regions and registers.
Specifying the Region and Edit Points
Explains selecting regions and specifying edit points.
Creating and Editing Keyframes
Details creating and editing keyframes.
Inserting Keyframes
Describes inserting keyframes into an existing effect.
Modifying Keyframes
Explains modifying a single keyframe or a range of keyframes.
Deleting Keyframes
Describes deleting keyframes from an effect.
Moving Keyframes
Explains moving keyframes to a different position.
Copying Keyframes
Describes copying keyframes.
Pause
Explains applying a pause to a keyframe.
Keyframe Loop (Repeated Execution of a Specified Range)
Describes executing a loop range repeatedly.
Undoing an Edit Operation
Explains how to undo keyframe edit operations.
Duration Mode Setting
Explains variable and constant duration modes for keyframes.
Time Settings
Details setting keyframe duration, effect duration, and delay.
Setting the Keyframe Duration
Explains setting the duration from one keyframe to the next.
Setting the Effect Duration
Details setting the total execution time of an effect.
Path Settings
Specifies how interpolation is carried out from one keyframe to the next.
Effect Execution
Explains replaying effects as a continuous sequence of images.
Saving Effects
Describes saving effects in registers.
Saving an effect in a specified register
Explains how to save an effect in a specific register.
Creating and Saving a Master Timeline
Explains saving region information and register numbers in a master timeline register.
Recalling and Executing a Master Timeline
Describes recalling and executing master timelines.
Editing Registers
Details operations on effect registers and master timeline registers.
Chapter 13 Snapshots
Overview
Defines a snapshot as saving configured conditions for applying effects.
Snapshot Attributes
Describes special conditions attached to snapshots.
Snapshots applying to a particular region (functional block of the switcher or DME)
Explains snapshots applying to regions assigned to selection buttons.
Snapshots applying only to particular functions
Details snapshots including key settings, wipe settings, or DME wipe settings.
Snapshot Operations (Numeric Keypad Control Block)
Details saving and recalling snapshots using the numeric keypad.
Saving a snapshot
Explains how to save the current state as a snapshot.
Recalling a snapshot
Describes recalling a snapshot file from memory.
Deleting a snapshot
Explains how to delete a snapshot.
Snapshot Operations (Flexi Pad Control Block)
Details saving and recalling snapshots using the Flexi Pad control block.
Banks and Registers
Explains how registers are grouped into banks.
Saving a snapshot
Describes saving the current state as a snapshot.
Recalling a snapshot
Explains recalling a snapshot.
Setting Key Snapshot Attributes
Details adding attributes to a key snapshot.
Creating and Saving a Master Snapshot
Explains creating and saving a master snapshot.
Chapter 14 Utility/Shotbox
Utility Overview
Defines utility as assigning actions or menu shortcuts to buttons.
Utility Execution
Explains executing utility functions using various blocks.
Utility Execution (Menu Panel)
Details assigning actions to user preference buttons.
Utility Execution (Utility/Shotbox Control Block)
Explains assigning actions to memory recall buttons.
Utility Execution (Cross-Point Control Block)
Describes assigning actions to cross-point control block buttons.
Shotbox Overview
Defines shotbox as saving combinations of snapshots or keyframe effects.
Shotbox Register Creation
Explains creating shotbox registers using the numeric keypad or menu.
Shotbox Register Creation (Numeric Keypad Control Block)
Details creating shotbox registers using the numeric keypad.
Shotbox Execution
Explains executing shotboxes using various blocks.
Shotbox Execution (Numeric Keypad Control Block)
Details executing shotboxes using the numeric keypad.
Shotbox Execution (Flexi Pad Control Block)
Explains executing shotboxes using the Flexi Pad control block.
Shotbox Execution (Utility/Shotbox Control Block)
Describes executing shotboxes using the utility/shotbox control block.
Shotbox Execution (Cross-Point Control Block)
Explains executing shotboxes using the cross-point control block.
Shotbox Register Editing
Details editing shotbox registers.
Chapter 15 Macros
Overview
Defines a macro as storing sequences of control panel operations.
Macro registers
Explains macro registers holding macro sequences.
Events
Defines individual control panel operations constituting a macro as events.
Macro Creation and Editing
Details creating and editing macros.
Enabling/disabling auto insert mode
Explains automatically registering operations as events.
Creating a macro
Describes recalling a register and creating events.
Macro attachments
Explains linking macro execution to button functions or fader levers.
Setting a macro attachment to a button
Details setting macro attachments to buttons.
Macro Operations (Cross-Point Control Block)
Explains macro operations using the cross-point control block.
Macro Operations (Menu)
Describes editing macro registers and events using menus.
Macro Register Editing
Details checking status and editing macro registers.
Online Editing of Macro Events
Explains carrying out online editing of macro events.
Offline Editing of Macro Events
Describes carrying out offline editing of macro events.
Macro Operations (Numeric Keypad Control Block and Utility/Shotbox Control Block)
Details macro operations using numeric keypad and utility/shotbox blocks.
Recalling a Macro Register and Executing a Macro
Explains recalling a macro register to execute a macro.
Executing a macro in normal execution mode
Describes executing a macro in normal mode.
Executing a macro in step execution mode
Explains executing a macro step by step.
Macro Creation and Editing
Details creating and editing macros.
Specifying an edit point
Explains how to specify an edit point for macro events.
Inserting an event
Describes inserting an event into a macro.
Modifying an event
Explains how to modify a macro event.
Deleting an event
Describes deleting a macro event.
Macro Operations (Flexi Pad Control Block)
Details macro operations using the Flexi Pad control block.
Banks and registers
Explains banks and registers for Flexi Pad control block.
Recalling a Macro Register and Executing a Macro
Describes recalling a macro register and executing it.
Chapter 16 Files
Overview of File Operations
Explains saving and recalling register data as files.
File operations
Details operations on individual files and registers.
Directory operations
Explains creating, renaming, and deleting directories.
Copying files between unit IDs
Describes copying files between different unit IDs.
File transfer errors
Provides information on handling file transfer errors.
Operations on Individual Files
Explains saving or loading individual file or register contents.
Detailed File Information
Describes snapshot file information.
Region Selection
Explains carrying out file operations on multiple regions.
Selecting a Device for Operation
Specifies register, local drive, or removable drive for file operations.
Saving Files
Describes saving snapshot register data to local or removable drives.
Loading Files
Explains loading snapshot files into registers.
Copying Files
Describes copying files within or between directories.
Renaming Files
Explains renaming files on local or removable drives.
Deleting Files
Describes deleting data from local or removable drives.
Chapter 17 System Setup
Settings Relating to the Network
Describes configuration of devices connected to the switcher system LAN.
Setting the Group ID and Unit ID of the Menu Panel
Sets the group ID to '1' and unit ID (1 to 4).
Configuring the NFS Server
Sets the address of the NFS server to use.
Settings Relating to System Configuration
Configures system operation modes and switcher control.
Selecting the Operation Mode
Sets system operation mode to Single Proc or Dual Simul.
Specifying the Switcher Controlled by the Control Panel
Selects the target switcher to control.
Settings Relating to Signal Formats
Configures settings for primary inputs and format converters.
About 4K format
Details 4K format image splitting and processing.
Setting the Signal Format
Selects signal format combinations for inputs.
Enabling Passage of 59.94 (2×) Format Signals on an AUX Bus
Enables passage of 59.94 (2x) signals on AUX bus.
Switching the Input Reference Signal
Links SWR1/DME1 and SWR2/DME3 input reference signal settings.
Setting the Screen Aspect Ratio
Sets the screen aspect ratio to 16:9 or 4:3.
Power-On (Startup) State Selection
Sets the initial state of each device when powered on.
Saving and Recalling Setup Data
Describes saving and recalling updated setup data.
Saving User-Defined Settings
Explains how to save setup and initial status settings.
Reset and Initialization
Resets or initializes memory on each device.
Settings Relating to Installation and Devices
Covers installing software and firmware for devices.
Installing Software
Details connecting a drive with software and installing it.
Configuring Settings to Use the Software
Explains entering an install key to enable software options.
Chapter 18 Control Panel Setup
Settings Relating to Control Panel Configuration
Details settings for control panel configuration.
Setting the Configuration for Each Bank
Changes assignments for each bank to determine cross-point module use.
Inhibiting Operation on a Bank
Allows inhibiting operation on M/E and PGM/PST rows.
Assigning a Single M/E to Two M/E Banks
Assigns cross-points for shifted/unshifted states using two M/E banks.
Interchanging shifted and non-shifted operations for a dual M/E
Explains interchanging shifted and non-shifted operations for dual M/E.
Linking Switcher Bus and Router Destinations
Links switcher bus and router destination.
Setting a Link Table
Makes settings for the link number selected in the External Bus Link menu.
Linking Transitions Between Keyers
Links transition execution and key on/off settings between keyers.
Setting the Buttons and Fader Levers on the Key Fader Control Block
Assigns keys to delegation buttons and sets fader lever operations.
Setting key delegation button assignments
Assigns target key delegation buttons.
Setting the region selection buttons selected when the [ALL] button is pressed
Sets region selection buttons for when the [ALL] button is pressed.
Setting Transition Control Block Button Assignments
Assigns buttons on the transition control block.
Setting Independent Key Transition Control Block Button Assignments
Assigns keys to independent key transition control block buttons.
Setting Flexi Pad Control Block Button Assignments
Sets Flexi Pad control block button assignments.
Setting Utility/Shotbox Control Block Button Assignments
Changes assignments of mode selection and keyframe operation buttons.
Setting Device Control Block Button Assignments (Trackball)
Changes assignments of device control block buttons.
Setting Menu Panel Button Assignments
Changes assignments of top menu selection and user preference buttons.
Inhibiting Utility 2 Bus and Key Operations
Allows inhibiting operations on utility 2 bus and keys.
Cross-Point Settings
Details creating cross-point assign tables.
Creating Cross-Point Assign Tables
Explains creating main and other tables for cross-point assignment.
Chapter 19 Switcher Setup
Settings Relating to Switcher Configuration
Details settings for switcher configuration.
Adjusting the Reference Phase
Adjusts the switcher internal reference phase.
Specifying the Video Switching Timing
Selects video switching timing.
Setting the Operation Mode
Sets the output signal configuration for each bank.
Assigning the output of each bank in multi-program mode
Configures Out2 to Out6 settings in Multi Program mode.
Setting the output configuration for each bank
Configures settings for Multi Program or DSK mode.
Setting the key preview configuration
Sets the key preview configuration for each bank.
Settings Relating to Signal Inputs
Configures settings for primary inputs 1 to 160.
Setting Initial Crop
Sets the initial crop for aspect ratio.
Setting the Illegal Color Limiter for Matte Signals
Enables/disables the illegal color limiter for signals generated by DME.
Setting the Format Converter Configuration
Sets internal format converter inputs and outputs.
Assigning a signal to a format converter output
Assigns a signal to convert by the format converter.
Setting the Active Area
Sets the active area for 4K signal outputs.
Settings Relating to Video Switching
Details settings for video switching.
Selecting the Bank to Configure
Selects the target bank for transition settings.
Setting the transition preview mode
Sets transition preview mode to Hold, Lock, or One-time.
Selecting independent key transition mode
Selects transition type for key insertion and removal.
Selecting the background transition flip flop mode
Enables or disables flip-flop mode.
Enabling/disabling split faders
Enables or disables split faders.
Enabling/disabling the fade-to-black function
Enables or disables the fade-to-black function.
Setting the operation mode when the [AUTO TRANS] button or [TAKE] button is pressed during an auto transition
Selects operation mode when [AUTO TRANS] or [TAKE] is pressed.
Setting the [TRANS PVW] button operation mode
Selects operation mode for the [TRANS PVW] button.
Setting the [KEY] button operation mode when a key source bus is selected
Selects operation mode for the [KEY] button.
Setting the Operation Mode of the [ALL] Button in the Transition Control Block
Sets the next transition selected by the [ALL] button.
Setting Device Control Block Button and Trackball Operation
Changes assignments of device control block buttons and trackball.
Setting the trackball and Z-ring sensitivity in fine mode
Selects trackball and Z-ring sensitivity in fine mode.
Setting the Macro Execution Mode
Selects macro execution mode.
Setting the Cross-Point Control Block to Key/AUX Bus Delegation Mode
Sets the cross-point control block to key/AUX bus delegation mode.
Assigning a bus/function to a 1st row delegation button
Assigns buses or functions to 1st row delegation buttons.
Setting Button and Indicator Status on the Cross-Point Control Block/AUX Bus Control Block
Sets color of cross-point buttons and indicator status.
Configuring the Cross-Point Pad
Assigns functions to cross-point pad buttons.
Chapter 20 DME Setup
Settings Relating to Signal Inputs
Configures settings for primary inputs.
Setting Initial Crop
Sets the initial crop for aspect ratio.
Setting the Illegal Color Limiter for Matte Signals
Enables/disables the illegal color limiter for matte signals.
Chapter 21 DCU Setup
About DCU setup
Explains DCU function using GPI ports and serial port.
Parallel Input Settings
Assigns SIU parallel input ports with priority sequence.
Assigning a GPI Input Port
Assigns a GPI input port.
GPI Input Settings
Configures trigger type and other settings for each GPI input.
Parallel Output Settings
Assigns tally information for each source and destination.
Assigning a GPI Output Port
Sets the GPI output port number.
GPI Output Settings
Configures trigger type and other settings for each GPI output.
Serial Port Settings
Sets protocol and control panel for serial port devices.
Configuring Serial Port Settings
Sets protocol and control panel for serial port devices.
Configuring Detailed Settings for an External Device Connected to the Serial Port
Configures detailed settings for external devices.
Configuring detailed settings for a P-Bus device
Details settings for P-Bus devices.
Configuring detailed settings for a VTR
Details settings for VTRs.
Chapter 22 Router Interface and Tally Setup
Router Interface Settings
Explains the interface with a router using S-Bus protocol.
Assigning Switcher Inputs/Outputs to S-Bus Space
Assigns switcher matrix to S-Bus space and selects matrix size.
Setting External Boxes 1 to 12
Assigns a matrix as an external selector to S-Bus space.
Tally Group Settings
Allows tally control for groups 1 to 8 using S-Bus protocol.
Wiring Settings
Sets S-Bus space for input/output connections.
Configuring Wiring
Specifies destination start and end addresses.
Tally Generation Settings
Specifies destination for tally generation and configures settings.
Configuring Tally Generation
Sets tally generation mode.
Tally Copy Settings
Copies tally information from one source to another.
Configuring Tally Copy
Sets source and copy destination.
Parallel Tally Settings
Configures parallel port for tally information output.
Configuring/Modifying Parallel Tally
Configures or modifies parallel tally settings.
Serial Tally Settings
Configures tally type and source address for each serial tally port.
Configuring/Modifying Serial Tally
Configures or modifies serial tally settings.
Appendix
Wipe Pattern List
Lists standard, enhanced, rotary, mosaic, and random/diamond dust wipe patterns.
DME Wipe Pattern List
Lists DME wipe patterns available in 1-channel and 2-channel modes.
Resizer DME Wipe Pattern List
Lists resizer DME wipe patterns.
Menu Tree
Shows the configuration of each menu.
Frame Memory Menu
Lists frame memory menus and their default recall settings.
Color Bkgd Menu
Lists color background menus and their default recall settings.
Aux Menu
Lists AUX menus and their default recall settings.
Copy/Swap Menu
Lists copy/swap menus and their default recall settings.
Misc Menu
Lists misc menus and their default recall settings.
Status Menu
Lists status menus and their default recall settings.
Need help?
Do you have a question about the MKS Series and is the answer not in the manual?
Questions and answers