Related Manuals for Daikin LXE10E136
Summarization of Contents
1. INTRODUCTION
1.1 Operation range
Use the units within the following range.
1.2 Basic names of components
Identifies key components of the refrigeration unit.
1.3 Basic operation of refrigeration unit
Details the fundamental steps for operating the unit.
2. GENERAL DESCRIPTION
2.1 Main specifications
Lists the technical specifications of the LXE10E100 or later model.
2.2 Names of components
Identifies and illustrates the external and internal parts of the unit.
2.3 Set point of functional parts and protection devices
Details set points for various protection devices.
2.5 Operation modes and control
Explains different operational modes like Chilled, Frozen, and Defrost.
3. ELECTRONIC CONTROLLER
3.2 Basic operation of electronic controller
Describes the control panel and its components.
3.3 Operation procedure
Outlines the sequence of operations for the controller.
3.4 Alarm display and back-up function
Explains alarm codes and system backup mechanisms.
3.5 Back Up Battery
Details the function and replacement of the backup battery.
3.8 PTI (Pre-Trip Inspection) AND PERIODIC INSPECTION
Describes the automatic inspection processes.
4. SERVICE AND MAINTENANCE
4.1 Maintenance service
Covers essential maintenance procedures for the unit.
4.2 Main components and maintenance
Details maintenance for key components like compressors and fans.
5. OPTIONAL DEVICES
5.1 Electronic temperature recorder
Describes the function and installation of the temperature recorder.
5.2 USDA transportation
Explains requirements for USDA transportation using unit sensors.
5.4 PARTIAL FROZEN MODE
Details the operation and control for the partial frozen mode.
6. TROUBLESHOOTING
6.1 Refrigeration system and electrical system
Provides a guide for diagnosing system issues.
6.2 Alarm codes on electronic controller
Lists and explains controller alarm codes for troubleshooting.
6.3 Troubleshooting for automatic PTI (J-code)
Guides users through troubleshooting based on PTI codes.
6.5 Emergency operation
Explains procedures for emergency operation of the controller and components.
7. APPENDIX
7.1 Standard tightening torques for bolts
Lists torque specifications for various bolts.
7.2 Standard tightening torque for flare nut
Provides torque values for flare nut connections.
7.9 Piping diagram
Illustrates the refrigerant piping layout of the LXE10E unit.
7.12 Schematic wiring diagram (LXE10E136)
Provides the electrical schematic for the unit.
Need help?
Do you have a question about the LXE10E136 and is the answer not in the manual?
Questions and answers