Location Requirements; Electrical Requirements - Viking DDSF136DSS Installation Manual

Installation Requirements

Location Requirements

NOTES:
•
The cabinet depth refrigerator can be installed into a recessed opening, at the end of cabinets or
as a freestanding refrigerator.
•
If you are installing the refrigerator to fit flush with the front of the base cabinets, all shoe molding
and baseboards must be removed from the rear of the refrigerator opening.
•
Location should permit doors to open fully. See the "Door Swing Dimensions" section.
•
Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where
the temperature will fall below 55°F (13°C).
•
Floor must support refrigerator weight (more than 600 lbs [272 kg], door panels and contents).

Electrical Requirements

Before you move your refrigerator into its final location, it is important to make sure you have the
proper electrical connection.
6