Control Panel - Sanyo mpr-214f - Commercial Solutions Refrigerator Instruction Manual

REFRIGERATOR COMPONENTS

Control panel

10 9 8 7 6
1 2 3 4 5
1. Alarm buzzer stop key (BZ): Press this key to silence the buzzer in the event that the alarm
operates and buzzer sounds. See page 18 for the details.
2. Display select key (REF./FREEZ.): By pressing this key, chamber temperature display of
refrigerator or freezer and each setting is selected.
3. Set key (SET): Pressing this key activates temperature set mode and the digit which can be set is
flashed. By pressing the key again after setting, the set value is accepted.
4. Digit shift key ( ): Pressing this key in set mode causes the changeable digits to move. Key lock
is activated by pressing this key for more than 5 seconds in the temperature display mode. See "Key
lock operation" on page 15.
5. Numerical value shift key ( ): Pressing this key in the setting mode causes the numerical value to
change. "ON-OFF" of key lock can be selected by pressing this key in the key lock mode.
6. Temperature display: This indicator shows the chamber temperature, set temperature, or error
code.
7. Refrigerator indicator (REFRIGERATOR): This indicator is lit when the refrigerator is selected.
8. Freezer indicator (FREEZER): This indicator is lit when the freezer is selected.
9. Alarm lamp (ALARM): This lamp is flashed during alarm condition. Refer to page 18 "Alarm
temperature setting".
10. Door check lamp (DOOR): This lamp is lit when the door is open.
11