Related Manuals for Launch Creader Professional 129X
Summarization of Contents
Introduction
Smart Diagnosis (Auto-Detect)
Auto-detect process for vehicle diagnosis.
Manual Diagnosis
Manual vehicle diagnosis with menu-driven commands.
OBDII Diagnosis
Supports 10 modes of OBD II tests for emissions.
Reset Functions
Performs common maintenance and reset items like Oil lamp reset.
One-click Update
Updates diagnostic software and APK online.
Diagnostic History
Provides quick access to tested vehicles and reports.
Diagnostic Feedback
Submits vehicle issues for analysis and troubleshooting.
DTC Library
Accesses definitions of diagnostic trouble codes.
Battery Voltage Display
Shows real-time battery voltage when connected.
Input Methods
Supports both touch and keypad input for operation.
General Information
On-Board Diagnostics (OBD) II
Second generation of On-Board Diagnostic system.
Diagnostic Trouble Codes (DTCs)
Codes stored by the on-board computer for vehicle problems.
Location of the Data Link Connector (DLC)
Identifies the 16-pin diagnostic connector on vehicles.
OBD II Readiness Monitors
Indicators for emissions component evaluation status.
OBD II Monitor Readiness Status
Indicates if components have completed testing.
OBD II Definitions
Defines key terms like PCM and MIL.
Product Descriptions
Outline of Creader Professional Series
Overview of the tool's physical components and models.
Technical Specifications
Details on screen size, RAM, battery, and operating limits.
Accessories Checklist
Lists included items with the diagnostic tool.
Initial Use
Charging The Tool
Instructions for charging the device via cable.
Getting Started
Initial setup steps: language, time zone, and network.
Job Menu
Main menu for accessing diagnostic functions and settings.
Diagnose
Connection Procedure
Steps to connect the tool to the vehicle's DLC.
System Diagnosing
Diagnosing electronic control systems of a single vehicle model.
Smart Diagnosis (Auto-Detect)
Automatic VIN detection and system scanning.
Manual Diagnosis
Manual vehicle diagnosis flow and options.
OBDII Diagnosis
Quick access to DTCs, MIL, and monitor status checks.
Data Stream
Data Stream
Displays live data and parameters in various modes.
View Freeze Frame
Snapshot of vehicle conditions during an emission-related fault.
O2 Sensor Test
Reads the results of the ECU's last O2 sensor test.
On-board Monitor Test
Reads results of on-board diagnostic monitoring tests.
EVAP System Test
Initiates a leak test for the vehicle's EVAP system.
Vehicle Info
Displays VIN, CID, and CVN information.
Data
Diagnostic Report
Stores and allows viewing of all diagnostic reports.
Diagnostic Record
Stores and plays back recorded data stream items.
Settings
Units of measurement
Sets the measurement unit to Metric or English.
Automatic detection on connect
Configures VIN detection upon connecting to vehicle.
Display & Brightness
Adjusts standby time and screen brightness.
Sound Settings
Adjusts the volume and other sound settings.
Network Configuration
Connects to wireless LANs for online functions.
Date/Time Settings
Sets the system date and time.
Language Selection
Changes the tool's display language.
Email Setup
Configures the default email for receiving reports.
Recovery Mode
Resets the tool to default factory settings.
Clean Up Storage
Clears cache files to free up storage space.
About Tool
Displays hardware configuration and license agreement.
Need help?
Do you have a question about the Creader Professional 129X and is the answer not in the manual?
Questions and answers