NI PXIe-4163 User Manual

USER GUIDE
PXIe-416x Remote Sense
Resistor Accessory
Sense Resistor Accessory for the PXIe-4162/PXIe-4163
This document explains how to install and use the PXIe-416x Remote Sense Resistor
Accessory with a PXIe-4162/PXIe-4163 source measure unit (SMU)-collectively referred to
as the PXIe-416x-and includes PXIe-416x Remote Sense Resistor Accessory specifications.
The PXIe-416x Remote Sense Resistor Accessory is used to modify the behavior of the
PXIe-4162/PXIe-4163 SMU when the module is used in remote sense mode.
Read this document and the documents listed in the Additional Resources section about
installation, configuration, and operation of this product before you install, configure, operate,
or maintain this product. Users are required to familiarize themselves with installation and
wiring instructions in addition to requirements of all applicable codes, laws, and standards.
Caution
the product in a manner not specified can damage the product and compromise the
built-in safety protection. Return damaged products to NI for repair.
Attention
documentation d'utilisation. L'utilisation du produit de toute autre façon que celle
spécifiée risque de l'endommager et de compromettre la protection de sécurité
intégrée. Renvoyez les produits endommagés à NI pour réparation.
Notice This device is intended for use only with the PXIe-4162/PXIe-4163 SMU.
For more information about the PXIe-4162/PXIe-4163, refer to ni.com/manuals.
Contents
Icons.......................................................................................................................................... 2
Getting Started with the PXIe-4162/4163 Remote Sense Resistor Accessory......................... 2
Kit Contents and Other Equipment................................................................................... 2
Installing the PXIe-416x Remote Sense Resistor Accessory............................................2
PXIe-416x Remote Sense Resistor Accessory Specifications.................................................. 5
Definitions.........................................................................................................................6
Derating.............................................................................................................................6
Physical............................................................................................................................. 6
Observe all instructions and cautions in the user documentation. Using
Suivez toutes les instructions et respectez toutes les mises en garde de la