Related Manuals for Argo Frontier 700 8x8
Summarization of Contents
Argo Operator Manual Introduction
Welcome Message and Company History
A welcome message from Argo builders, highlighting history and commitment to quality.
Argo Operator's Manual Preface
Important Preface and Operator Cautions
Contains essential preface information and critical safety cautions for all Argo operators.
Section 1: General Vehicle Information
Amphibious Operation, Maintenance, and Legends
Covers amphibious use, maintenance procedures, wind chill factors, and manual legends.
Vehicle Capacity and Seating Features
Details load capacities, trailer specs, and rear seat removal/installation for Argo models.
Section 1: Model Specifications and Controls
Frontier Model Specification Matrices
Provides detailed specification comparisons for Frontier 6x6 and 8x8 vehicle models.
Control Locations and Information Labels
Identifies key vehicle controls and important safety/operational labels on the Argo.
Section 2: General Operating Information
New Vehicle Break-in and Pre-Operation Checks
Guides on initial vehicle break-in procedures and essential daily pre-operation checks.
Passenger, Cargo, and Operator Safety
Covers safe passenger/cargo handling and special advice for operators with disabilities.
Section 3: Operating Instructions - Controls
Brakes, Steering, Throttle, and Starting
Explains the core controls for operating the Argo, including brakes, steering, throttle, and starting.
Engine Stopping, Priming, and Gears
Details procedures for stopping the engine, priming the fuel system, and selecting transmission gears.
Section 3: Gear Usage and Lighting
Transmission Gear Recommendations
Provides guidance on changing gears and recommendations for using different gear ranges.
Headlight Operation and Electrical Cautions
Covers operating headlights and general cautions regarding battery drain from lights.
Section 4: Driving Procedures
Basic Driving and Turning Techniques
Explains how to drive straight, stop, turn, and the dynamics of skid steering.
Backing Up and Vehicle Control
Details procedures for backing up the vehicle and turning while reversing.
Section 5: Driving in Unusual Conditions
Remote Area, Angles, and Hill Driving
Guides operation in remote areas, on angles, and safe uphill driving techniques.
Downhill and Side Slope Operation
Covers safe downhill driving and critical precautions for side slope operation.
Section 5: Water Driving Procedures
Amphibious Operation and Water Entry
Details procedures for entering water, driving in water, and safety precautions.
Winter Operation Precautions
Provides guidelines for operating the Argo in winter conditions.
Ice Covered Water Safety
Details safety precautions and procedures for operating on ice-covered bodies of water.
Section 6: Oil, Filter, and Lubrication Information
Engine Oil Management and Checks
Covers engine oil types, checking levels, and recommended oil specifications for Argo engines.
Changing Engine Oil and Transmission Oil
Details procedures for changing engine oil and checking/changing transmission oil levels.
Section 6: Transmission and Filter Maintenance
Transmission Oil Refill and Filter Information
Guides on refilling transmission oil and maintaining air, fuel, and oil filters for engine health.
Clutch Lubrication and Drive Chain Lubrication
Covers lubrication requirements for clutch components and drive chains to prevent wear.
Section 6: Automatic Oiler and Bearing Lubrication
Automatic Oiler and Idler Chain Lubrication
Details automatic chain oiler system operation and lubrication for idler and axle bearings.
Axle Bearing Lubrication Procedures
Covers lubrication procedures for outer and inner axle bearings.
Section 7: Electrical System Maintenance
Electrical System General Maintenance
Covers battery care, fuses, spark plugs, and spark arresters for the electrical system.
Section 7: Drive Belt and Clutch Maintenance
Drive Belt and Clutch Maintenance
Details maintenance for drive belts, clutches, and related adjustments for optimal performance.
Section 7: Drive Chain Maintenance
Drive Chain Maintenance Procedures
Covers drive chain removal, installation, and take-up system maintenance.
Idler Chain and Slider Block Maintenance
Details maintenance for idler chains and slider blocks, including adjustment and replacement.
Section 7: Tire Inflation and Repair
Tire Inflation and Repair Procedures
Covers tire inflation pressures, repair, and replacement for safe vehicle operation.
Axle Bearing Mounting Procedures
Details the mounting of axles and checks for bearing seals and gaskets.
Section 7: Hydraulic Brakes and Fluid
Hydraulic Brake System Maintenance
Covers brake fluid level checks, changes, and pad inspection procedures.
Section 7: Brake Adjustments and Cooling
Brake Adjustments and Cooling Systems
Details brake plunger adjustment, cooling systems, and engine exhaust maintenance.
Daily Checks and Service Charts
Provides a daily checklist and detailed service charts for vehicle maintenance.
Section 7: Service Charts and Schedules
20/20 and 100/12 Service Charts
Outlines inspection points for 20-hour and 100-hour service intervals.
Comprehensive Maintenance Schedule
Presents a schedule for regular maintenance tasks based on operating hours.
Section 8: Troubleshooting Common Issues
Engine, Drive, and Steering Problems
Lists common malfunctions like engine not starting, drive issues, and steering problems with solutions.
Brake, Water Leak, and Vibration Issues
Solves problems such as brake inefficiency, water leaks, tire leaks, and severe vibrations.
Section 9: Vehicle Cleaning and Storage
Cleaning Procedures
Outlines steps for washing the vehicle body and flushing the lower body.
Preparation for Extended Storage
Details fuel draining, battery prep, electrical system protection, and raising the vehicle for storage.
Section 10: Potential Hazards and Safety
Operator and Vehicle Hazards
Identifies potential hazards, their consequences, and how to avoid them during operation.
Driving, Water, and Environmental Hazards
Covers hazards related to terrain, speed, water use, and environmental conditions for safe operation.
Section 11: Accessory Information - Tracks
General Accessories and Track System Preparation
Introduces accessories, cargo tie-downs, and tire preparation for the rubber track system.
Rubber Track System Installation and Operation
Details installation, removal, and operating precautions for the Argo rubber track system.
Section 11: Specific Accessories and Winch
Cleats, Outboard Mount, Storage Covers, and Winch
Covers ice cleats, outboard motor brackets, storage covers, and power winch basics.
Power Winch Safe Operation and Life Extension
Provides rules for safe winch operation and tips to extend the winch's lifespan.
Section 11: Additional Accessories and Decals
Windshield and Convertible Top Usage
Guides on windshield installation, use, and convertible top operation and storage.
Snow Plow, Trailer, and Other Accessories
Covers operation of snow plows, amphibious trailers, rear seats, and brushguards.
Limited Warranty Information
Warranty Coverage, Limitations, and Exclusions
Outlines the warranty period, what it covers, and common limitations and exclusions.
Obtaining Warranty Service and Coverage
Advises customers on the steps to take to obtain warranty coverage for their Argo vehicle.
Emissions Warranty Information
U.S. EPA and CARB Emissions System Warranty
Details the U.S. EPA and CARB evaporative emissions warranty for Argo vehicles.
Need help?
Do you have a question about the Frontier 700 8x8 and is the answer not in the manual?
Questions and answers