Related Manuals for WAREMA Wisotronic 3
Summarization of Contents
Safety instructions
Meanings of symbols and pictographs
Explains warning symbols and their meanings used in the manual.
Intended use
Details the product's designated purpose and limitations for proper operation.
Target group
Identifies the intended audience for these installation instructions.
General safety instructions
Provides overarching safety guidelines for the control system's automatic operation.
Working safely
Outlines procedures for safe installation, connection, repair, and maintenance.
Retrofitting and modifications
Advises on procedures and potential risks when altering the system.
Additional documents
Lists related documentation available for further reference.
Basic software versions
Specifies the software versions the manual is based on.
Introduction
Operating elements
Describes the components of the Wisotronic control panel interface.
Principal structure of a Wisotronic system
Illustrates the system architecture and component connections.
Concept
Explains the fundamental system logic of products, channels, groups, and scenes.
Sensor
Weather station multisense
Details the features and installation of the multisense weather station.
Sensor Wind/Photo/Radio Clock
Describes a sensor combining wind, photo, and radio clock functions.
Sensor Photo/Radio Clock
Details a sensor for light-dependent control with radio clock.
Sensor Photo (180°)
Describes a photo sensor with a 180° detection range.
Sensor Outside temperature
Explains the sensor for measuring external temperature.
Sensor Inside temperature
Details the sensor for measuring internal room temperature.
Installation
Scope of delivery
Lists all items included in the Wisotronic package.
Options
Outlines available additional features and accessories.
Procedure
Provides a step-by-step guide for system installation.
Mounting the power unit
Details the installation process for the power unit in different housing types.
Installing the control panel
Explains how to mount the Wisotronic control panel on various surfaces.
Connection
Connection information
General guidelines and warnings for connecting components.
Terminals
Describes the screw and spring terminals for wiring connections.
Wiring diagrams
Provides visual guides for connecting various system components.
Overview
Start menu
Describes the initial screen displayed upon system startup.
Typical approaches for commissioning
Outlines different methods for setting up the Wisotronic system.
Commissioning
Planning with Quickstart
Guides users through initial system setup using a guided process.
System settings
Creating system settings
Overview of how to create and manage system settings.
Manage channels
Comfort functions
Configuring user-friendly features like automatic sun shading control.
Safety functions
Setting up protective functions like wind or ice monitoring.
Sensor allocation
Assigning sensors to specific channels for control.
Manage products
Product type
Selecting the type of sun shading product being controlled.
Copy settings from...
Duplicating configurations from one product to another.
Delete product
Removing a configured product from the system.
Channel allocation
Assigning a product to a specific control channel.
Contact allocation, Number of contacts
Assigning physical contacts to products.
Locking contact
Configuring contacts to lock product operation.
Runtime UP mm:ss
Setting the time for upward movement of a product.
Runtime DOWN mm:ss/On period mm:ss
Setting downward movement or on-time for products.
Slat products
Adjusting slat angles for light control in blinds.
Duration of the automatic calibration
Setting time for drive motor calibration to compensate for slip.
Manual mode
Configuring different modes for local product operation.
Control line protocol
Adapting the protocol for specific motor control units.
Measured values, triggers and faults
All measured values
Displays all current sensor readings and system data.
Measured values history
Provides historical data and graphs of measured values.
Current triggers
Shows active commands or events currently affecting the system.
Trigger history
Logs past commands and events that occurred in the system.
Faults
Lists any errors or malfunctions detected in the system.
Factory settings
Automatic parameters
Default settings for automatic control functions of different products.
Product parameters
Specific settings for various WAREMA sun shading products.
Product parameters for further products
Additional product-specific settings for extended compatibility.
System parameters
Basic system-wide parameters affecting overall functionality.
Need help?
Do you have a question about the Wisotronic 3 and is the answer not in the manual?
Questions and answers