Related Manuals for EXFO FIP-435B
Summarization of Contents
Introducing the FIP-400B Fiber Inspection Probe and ConnectorMax2 Mobile
Probe Overview
Details about the FIP-400B fiber inspection probe and its components.
Multifiber Source
Information on the EXFO Multifiber Source (MFS) and its capabilities.
Available Probe Models
Lists the different FIP probe models and their available features.
Probe Tips
Describes the interchangeable probe tips for various connector types.
Probe LED Indicators
Explains the meaning of the status, battery, and Wi-Fi LEDs on the probe.
ConnectorMax2 Mobile Software
Overview of the ConnectorMax2 Mobile application for fiber inspection.
Technical Specifications
Provides technical data and specifications for the FIP-400B and MFS.
Conventions Used
Explains the symbols and conventions used throughout the user guide.
FIP-400B Fiber Inspection Probe Regulatory Information
Canada and USA Interference Statement
Electromagnetic interference compliance for Canada and the USA.
European EMC Statement
Electromagnetic compatibility statement for European regions.
General Wireless Compliance
Information regarding wireless module compliance and usage.
Canada/USA Wireless Compliance
Wireless compliance details for Canada and the USA.
Radiation Exposure Statement
Statement regarding RF exposure limits and safe operation.
European Wireless Compliance
Wireless compliance information for European countries.
Local Radio Usage Restrictions
Restrictions on wireless LAN device usage in specific countries.
European Declaration of Conformity
EXFO's declaration of conformity with EU directives.
Japanese Technical Conformity Mark
Technical conformity mark information for Japan.
Multifiber Source Regulatory Information
Canada/USA Interference Statement
Electromagnetic interference compliance for MFS in North America.
European EMC Statement
Electromagnetic compatibility for MFS in Europe.
European Declaration of Conformity
MFS conformity declaration for EU member states.
Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
Preparing to Use the Mobile Application
Steps to prepare for using the ConnectorMax2 Mobile application.
Connecting or Disconnecting the Wireless Probe
Instructions for connecting and disconnecting the wireless probe.
Changing the Fiber Inspection Probe Tip
Procedure for changing the inspection tip on the probe.
Changing the FIP Nozzle (MF-Ready Probes)
Procedure for changing the nozzle on MF-Ready probes.
Adjusting Brightness
How to adjust the screen brightness for optimal viewing.
Setting up Identification
Configuring identification fields for test measurements.
Setting up the Incrementation
Configuring automatic increment/decrement for file naming.
Setting up Autonaming
Configuring automatic file naming conventions.
Setting up Auto Capture
Enabling the automatic capture feature.
Managing and Selecting Test Configurations
Managing, selecting, importing, and deleting test configurations.
Modifying the File Format
Changing the preferred file format for measurement data.
Stopping Analysis on First Fail
Configuring the analysis to stop upon the first detected failure.
Restoring to Default Settings
Procedure to restore the application settings to default.
Inspecting Fiber Ends
Inspecting Single Fiber Ends
Step-by-step guide for inspecting single fibers and transceivers.
Inspecting Multiple Fiber Ends
Procedure for inspecting multiple fibers using MF-Ready probes.
Saving Files
Methods for saving measurement files manually or automatically.
Managing Files
Instructions for opening and deleting saved measurement files.
Analyzing Captures
Details on using capture analysis features like auto-centering and auto-focus.
Creating and Viewing Reports
How to generate and view inspection and analysis reports in PDF.
Transferring Results With Third-Party Apps
Sharing measurement data with applications like Google Drive or Dropbox.
Using the Probe in Standalone Mode
Guide to using the probe without a connected smart device.
Updating the Firmware
Instructions for performing firmware updates on the probe.
Working with a Multifiber Source
Turning On or Off the Multifiber Source
How to power the Multifiber Source (MFS) on and off.
Setting up the Multifiber Source
Steps to connect and configure the MFS for testing.
Understanding Fiber Continuity
Explanation of fiber continuity testing and its results.
Understanding Fiber Polarity
Explanation of fiber polarity types (A, B, C) and testing.
Maintenance
General Maintenance
Recommended practices for general unit upkeep and care.
Battery Safety Recommendations
Important safety warnings related to battery handling and replacement.
Cleaning MPO-Type Connectors
Procedure for cleaning MPO-type connectors using a mechanical cleaner.
Cleaning Lenses
Instructions for cleaning the probe's optical lenses.
Recharging the Battery
Guide on how to recharge the probe's internal battery.
Recharging the Battery of the Multifiber Source
Instructions for recharging the MFS battery.
Replacing the Battery
Procedure for replacing the probe's rechargeable battery.
Replacing the Battery of the Multifiber Source
Procedure for replacing the MFS rechargeable battery.
Recycling and Disposal
Information on proper product recycling and disposal.
Troubleshooting
Solving Common Problems
Table of common issues and their recommended solutions.
Changing the File Contents
How to select between normal and enhanced file content formats.
Contacting Technical Support
Contact details for EXFO technical support and service.
Viewing ConnectorMax2 Mobile Information
How to view version and policy information for the mobile app.
Viewing Online Help
Accessing the online help resources for the mobile application.
Transportation Guidelines
Recommendations for safely transporting the unit.
Warranty
General Warranty Information
Details on the product's material and workmanship warranty.
Liability Limitations
EXFO's liability regarding product use and modifications.
Warranty Exclusions
Conditions and events that void the product warranty.
Product Certification
Statement confirming the equipment met specifications at shipment.
Service and Repairs
Process for sending equipment for service, repair, or calibration.
EXFO Service Centers Worldwide
Contact information for EXFO's authorized service centers globally.
Fiber Inspection Probe Tip Compatibility Chart
Manual Focus Level Adjustment
Procedure for manually adjusting the focus level for inspection.
Need help?
Do you have a question about the FIP-435B and is the answer not in the manual?
Questions and answers