Related Manuals for Eriez 66C
Summarization of Contents
Installation
Mounting
Instructions for securely attaching the feeder to a flat surface using bolts and lock washers.
Electrical Connections
Details on connecting the feeder power cord and ground to the control box or power source.
Operation & Maintenance
Tuning Guide
General information on tuning the unit to achieve desired vibratory displacement at full voltage.
How To Measure Displacement
Procedure to measure the feeder's displacement using a sticker and gauge.
Tuning For Non-Standard Trays
Procedure for tuning the unit when using off-size or non-standard trays.
Tuning For Different Conditions of Tray Loading
Guidance on tuning for various tray loading conditions and maintaining proper displacement.
Repairs
Coil Replacement
Step-by-step instructions for removing and replacing the electrical assembly, including the coil.
Spring Change Or Replacement
Instructions for identifying and replacing defective tuning springs in the feeder.
Feeder Drive Only (Less Tray Supplied)
Information for feeders shipped without a tray, requiring tuning to the specific tray.
Armature Replacement
Steps for replacing a damaged armature, similar to coil replacement procedures.
Troubleshooting
Troubleshooting Guide
Details common problems, causes, and corrective actions for feeder operation.
Need help?
Do you have a question about the 66C and is the answer not in the manual?
Questions and answers