Eriez TGH Installation, Operation And Maintenance

Permanent magnetic grate-in-housing

and Maintenance

Instructions

ERIEZ MAGNETICS

WORLD AUTHORITY IN ADVANCED TECHNOLOGY FOR MAGNETIC, VIBRATORY and INSPECTION APPLICATIONS

GRATE-IN-

HOUSING

MODEL TGH, FGH

HEADQUARTERS:

2200 ASBURY ROAD, ERIE, PA

16506–1440

SM-205E

U.S.A.

Table of Contents

Need help?

Do you have a question about the TGH and is the answer not in the manual?

Page 1 SM-205E Installation, Operation and Maintenance Instructions ® GRATE-IN- HOUSING MODEL TGH, FGH ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, ERIE, PA 16506–1440 U.S.A. WORLD AUTHORITY IN ADVANCED TECHNOLOGY FOR MAGNETIC, VIBRATORY and INSPECTION APPLICATIONS ®...
Page 2 Introduction This manual details the proper steps for operating and maintaining the Eriez Model TGH & FGH Permanent Magnetic Grate-in-Housing. Careful attention to these Operating Requirements will assure the most efficient and dependable performance of this equipment. Standard magnet circuits are suitable for temperatures below 150°F (65°C). Special circuits are required for higher temperatures depending upon application criteria.
Page 3 Operation and Maintenance The Eriez Model TGH and FGH Permanent Magnetic Using the sticky side of masking tape will achieve Grate-in-Housing is designed to operate in a line close to 100% iron removal from the tube after wiping of vertical product flow.
Page 4 Note: Some safety warning labels or guarding may have been removed before photographing this equipment. Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA ©2011 EriEz MagnEtics all rights rEsErvEd World Authority in Advanced Technology for Magnetic, Vibratory and Inspection Applications headquarters: 2200 asbury road, Erie, Pa 16506-1440 U.s.a.

Fgh