Encore ENVCWI-PTG1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual page 51

Event Configuration >> GPIO Trigger
Select the Enable option to enable the GPIO trigger function of the
camera, so that you can set Trigger Out function or send captured
images within the detecting area to the FTP server or email receiver.
You have to configure corresponding settings, such as FTP server
and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down
list.
- Action: Set the Trigger Out function or select the destination
of the captured images: Send Email or FTP Upload.
- 50 -