Encore ENVCWI-PTG1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual page 36

specified access point, set a SSID for the camera to
correspond with the access point's ESS-ID. To connect the
camera to an Ad-Hoc wireless workgroup, set the same
wireless channel and SSID to match with the computer's
configuration.
Click Site Survey to display the available wireless networks,
so that you can easily connect to one of the listed wireless
networks.
- Wireless Mode: Select the type of wireless communication for
the camera: Infrastructure or Ad-Hoc.
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure
the camera from being used by unauthorized user: Open,
Shared-key, WPA-PSK, and WPA2-PSK. The following table
explains the four options:
Open
Shared-key
WPA-PSK/
WPA2-PSK
List of searching results
The default setting of Authentication mode,
which communicates the key across the network.
Allow communication only with other devices
with identical WEP settings.
WPA-PSK/WPA2-PSK is specially designed for
the users who do not have access to network
- 35 -