Encore ENVCWI-PTG1 Quick Installation Manual
Wireless network (ip) camera with pan & tilt
Hide thumbs
Also See for ENVCWI-PTG1:
- Software user's manual (24 pages) ,
- Datasheet (6 pages) ,
- Installation manual (66 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Encore ENVCWI-PTG1
Summary of Contents for Encore ENVCWI-PTG1
- Page 1 ENVCWI-PTG1 Wireless Network (IP) Camera with PAN & TILT Quick Installation Guide...
-
Page 2: Getting Started
Getting Started Package Contents Check the items contained in the package carefully. You should have the following items. Once any item contained is damaged or missing, contact the authorized dealer of your locale. One Wireless Network (IP) Camera with PAN & TILT One AC Power Adapter One External Detachable Antenna One Wall Mount Kit... -
Page 3: Setting Up The Camera
Setting Up the Camera Installing the Wall Mount Kit The camera comes with a Wall Mount Kit, which allows you to place your camera anywhere by mounting the camera through the three screw holes located in the base of the Wall Mount Kit. Screw Wall Mount Kit Screw... - Page 4 Connecting the Camera to LAN Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you connect the AC power adapter, the camera is powered on automatically. You can verify the power status from the Power LED on the front panel of the camera.
- Page 5 Connecting the Camera to WLAN If you use a wireless network in your application environment, you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with “default” SSID. Connecting the External Antenna NOTE If the camera cannot connect to your wireless network, you...
-
Page 6: Accessing The Camera
Accessing the Camera Using IPFinder 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. 2. Click the IPFinder item to launch the utility. The control panel will appear as below. Display the connected camera(s). Double click to link the Camera. -
Page 7: Accessing To The Camera
IPFinder, click Install Software then select IPFinder on the Auto-Run screen. Accessing to the Camera 1. Connect your camera to the network (or the PC directly). 2. Since the default configuration of the camera is DHCP mode enabled, you are recommended to launch IPFinder to search the IP address that is assigned to the camera by the DHCP server, and then click Link to access the camera via the Web browser. - Page 8 4. Click Setup and then Smart Wizard to set up your camera quickly. The Smart Wizard will guide you through the necessary settings with detailed instructions on each step. - 7 -...
- Page 9 For details of operating UltraView, please refer to the Software User Guide on the provided Installation CD-ROM. If you have any problem on the product(s), please contact your local authorized dealer or check our web site http://www.encore- usa.com for support. - 8 -...