Rear View - Encore ENVCWI-PTG1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual

Ethernet Cable Connector
connects the network
cable, which supports the
NWay protocol so that the
camera can detect the
network speed
automatically.
GPIO Connectors
is used to connect the
external devices.

Rear View

Reset Button
will restart the camera when it
is pressed quickly; when it is
pressed and held for five
seconds, the camera will
resume the factory default
settings.
- 9 -
External Antenna
Connector connects
the external antenna.
DC Power Connector
connects the AC
power adapter, in
order to supply power
to the camera.
Audio-out Connector
connects an external
active speaker.