Encore ENVCWI-G1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual page 36

Event Configuration >> Motion Detect Trigger
Select the Enable option to enable the trigger function of the camera,
so that you can send captured images within the detecting area to
the FTP server, or email receiver. You have to configure
corresponding settings, such as FTP server and email server, to
enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down
list.
- Action: Select the destination that the captured images will be
sent to: Send Email, or FTP Upload.
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
camera by Email, or FTP. Select the Enable option on each item,
and then select a Schedule Profile from the pull-down list and set
the Interval time.
- 35 -