Encore ENVCWI-G1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual page 24

Network >> Network
IP Setting
This item allows you to select the IP address mode and set up
the related configuration.
- DHCP: Select this option when your network uses the DHCP
server. When the camera starts up, it will be assigned an IP
address from the DHCP server automatically.
- Static IP: Select this option to assign the IP address for the
camera directly. You can use IPFinder to obtain the related
setting values.
IP
Subnet Mask
Default Gateway
Primary/
Secondary DNS
- PPPoE: Select this option when you use a direct connection
via the ADSL modem. You should have a PPPoE account from
your Internet service provider. Enter the User Name and
Password. The camera will get an IP address from the ISP as
starting up.
NOTE Once the camera get an IP address from the ISP as starting
up, it automatically sends a notification email to you.
Therefore, when you select PPPoE as your connecting type,
you have to set up the email or DDNS configuration in
advance.
Enter the IP address of the camera. The
default setting is 192.168.0.30.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera.
The default setting is 192.168.0.1.
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
- 23 -