Connecting The Camera To Lan/Wlan - Encore ENVCWI-G1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual

2.2 Connecting the Camera to LAN/WLAN

Use the provided Ethernet cable to
connect the camera to your local
area network (LAN).
When you connect the AC power
adapter, the camera is powered on
automatically. You can verify the
power status from the Power LED
on the front panel of the camera.
Once connected, the Link LED
starts flashing green light and the
camera is on standby and ready
for use now.
If you use a wireless network in
your application environment, you
need to attach the included
external antenna to the camera.
When the camera is powered on,
the camera will automatically
search any access point with
"default" SSID.
NOTE If the camera cannot connect to your wireless network,
you need to install the camera in LAN and proceed with
WLAN settings.
Connecting the Ethernet Cable
Connecting the External Antenna
- 9 -