Accessing To The Camera - Encore ENVCWI-G1 - ADVANCED INSTALLATION GUIDE V1.1 Installation Manual

3.2 Accessing to the Camera

Whenever you want to access the camera:
1. Open the Web browser on your computer (for example, Microsoft
Internet Explorer in this guide)
2. Type the default IP address (192.168.0.30) or the IP address
found by IPFinder in the Address bar, and then press [Enter].
3. When the login window appears, enter the default User name
(admin) and password (admin) and press OK to access to the
main screen of the camera's Web Configuration.
NOTE If you are initially access to the camera, you will be ask to
install a new plug-in for the camera. Permission request
depends on the Internet security settings of your computer.
Click Yes to proceed.
Enter the IP address
of the camera here.
- 12 -
Enter the User name
and Password.