Chapter 4: Using The Remote Control - Encore ENUTV-3 User Manual

Chapter 4: Using the Remote Control

The Remote control allows you to operate the ENUTV-3 program, such as turning the TV
on or off, changing channel and volume, etc. Aim the upper front side of the Remote
Control to the Remote Control Receiver as you would do on other infrared remote control.
For default button assignments, please refer to the list below:
1. Open or Close ENLTV Program.
2. Mute
3. Number keys.
4. Single or Double digits channel.
5. Return to the previous channel last viewed
6. Switch TV signals, S-Video and A/V signal
7. Snapshot
8. Channel Up
9. Channel Low
10. Volume High
11. Volume Low
12. Full screen
13. Record
14. Record Pause
15. Video Settings：Click to respectively adjust
video brightness, contrast, hue and saturation
(use together with the right two direction key).
16. Decrease video setting.
17. Increase video setting.
18. Click to set video brightness, contrast, hue and saturation to default value.
19. Hide / Display ENLTV Control Panel.
20. Set time to shutdown Windows system.
22
www.encore-usa.com