Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Alexander SUPERBALL
Summarization of Contents
GETTING STARTED
How to Connect and Power On
Basic steps for connecting the pedal and powering it up for initial use.
Loading Factory Presets
How to access and listen to the four built-in factory presets.
OSCILLATOR CONTROLS
Understanding Delay Parameters
Overview of delay time, self-oscillation, and filter controls.
LFO and Sequencer Setup
Initial steps to disable LFO/Sequencer and set control modes.
Setting Control Range Bounds
Adjusting the lower and upper bounds for delay effect parameters.
LFO Mode Operation
How to activate and use the LFO for modulation effects.
SEQUENCER CONTROLS
Initial Sequencer Setup
Steps to set up the sequencer, similar to LFO setup.
Activating and Using the Sequencer
How to engage the sequencer and adjust its patterns and steps.
Troubleshooting Audio Pops
Solution for pops or clicks by adjusting the dry source.
SEQUENCE EDITING
Playing Sequencer Like a Synth
Using a MIDI keyboard to control sequencer pitch intervals.
Saving User Sequences
How user-created sequences are saved within presets.
LOADING AND SAVING PRESETS
Loading Presets
Procedure to load presets using the bypass footswitch.
Saving Presets
Method to save the current pedal settings as a preset.
MIDI Preset Management
Accessing and saving presets via MIDI controller.
TAP & TEMPO SYNC
Sync Source Assignment
Assigning LFO or sequencer to Tempo Sync modes.
Sync Mode Explanations
Details on No Sync, Tap Tempo, and Bounce/Step modes.
RAMPING
Activating the RAMP Function
How to engage the RAMP feature with the footswitch.
Controlling RAMP Speed
Adjusting the rate at which the RAMP morphs settings.
SETTING UP YOUR PEDAL
Entering Setup Mode
Steps to enter the pedal's user setting configuration mode.
Configuring MultiJack Function
Assigning functions like Expression, Footswitch, or MIDI to the MultiJack.
Setting Footswitch and LED Brightness
Configuring external footswitch behavior and LED brightness.
Saving Setup Changes
How to save the configured user settings.
EXPRESSION PEDAL
Expression Pedal Compatibility
Supported expression pedals and wiring specifications.
Using Expression Pedal with LFO
How the expression pedal interacts with LFO modulation.
GLOBAL CONTROLS
Accessing Global Controls
Steps to enter and adjust the pedal's global settings.
Global Control Parameters
Explanation of RAMP, LEVEL, EXT CH, and DRY SRC global controls.
EXTERNAL CONTROL
MIDI CC Output
How Superball sends LFO values via MIDI CC 100.
NEO FOOTSWITCH
Footswitch Configuration and Connection
Requirements for using the Neo Footswitch with the MultiJack.
Preset Selection Function
Using the Neo Footswitch to advance or go back through presets.
Ramp and Tap Tempo Functions
Using the Neo Footswitch for RAMP activation and Tap Tempo.
MIDI CONFIGURATION
MIDI Connection Overview
How to connect a MIDI controller to the pedal.
Setting MIDI Channel
Steps to configure the pedal's MIDI channel.
MIDI COMMANDS
MIDI Program Change Commands
Control for loading presets 0-15 via MIDI Program Change.
MIDI Continuous Controller Commands
Detailed list of CC messages for various pedal functions.
MIDI Clock and Notes
How MIDI Clock and Notes are used for tempo and sequencer control.
SPECIFICATIONS
Electrical Specifications
Input/output impedance, power supply, and bypass type.
DSP and Sampling Rate
Details on the digital signal processor and sampling frequency.
Need help?
Do you have a question about the SUPERBALL and is the answer not in the manual?
Questions and answers