Advertisement
Quick Links
Advertisement
Related Manuals for Alexander SPACE FORCE REVEBERATION LEAP Series
Summary of Contents for Alexander SPACE FORCE REVEBERATION LEAP Series
- Page 1 SPACE SPACE FORCE FORCE reverberation SERIES USER MANUAL v1.02...
- Page 2 This manual contains full technical details on the operation of this pedal. Alexander Pedals was started for two reasons - to make great tones, and to do good. The great tones part you For more information regarding firmware updates, update tools, and probably have some idea about.
- Page 3 CONTROLS & DISPLAY INS & OUTS Your Leap Series pedal is pretty complex under the hood, but we worked hard to make sure that We’ve equipped every Leap Series pedal with a plethora of pluggable ports, to allow you lots of it’s easy to drive.
- Page 4 SOUND MODES Space Force has eight selectable sound modes, each based on a different reverb effect type. You can tweak these modes to your taste, and you can save any sound to any preset. To change sound modes, turn the lower right knob on page 1.
- Page 5 SETUP MENU PRESETS How do you make quick changes on a pedal that has 12+ knobs? PRESETS. Every To enter the Setup menu, first hold down the PAGE / MENU knob (lower right,) then hold the Leap Series pedal allows you to save up to 32 presets that contain the entire state of left foot switch.
- Page 6 EXPRESSION PEDAL RAMPING Connect a TRS expression pedal to the MultiJack to control any or all of the pedal If you’re not into using an expression pedal, that’s okay - the Leap Series pedals parameters remotely. Enter the Setup menu and configure M.JACK = EXPRESSN, feature a built-in expression control function called RAMP.
- Page 7 TAP TEMPO AND MIDI CLOCK STEREO ROUTING Leap Series pedals support Tap Tempo for the modulation LFO or the delay time. The pedal Every Leap Series pedal is designed to work in a stereo context, but also shines in mono. will always prioritize the delay time for sound modes that have both LFO and delay.
- Page 8 111-127 CLR* CONTROLS LFO MIDI BEAT CLOCK JACK=MIDI (ALEXANDER) RATE (MODES 1,2 4,5,6) OR DELAY The MultiJack is also compatible with many devices using a passive MIDI to TRS cable, we recommend the Disaster Area 5P-TRS PRO but most TRS type-A cables should work so long as TIME (MODE 8) pin 2 is earthed at the MIDI controller output.
- Page 9 SPECIFICATIONS • Input: Mono or stereo (TRS) • Output: Mono or stereo (use either TRS or dual TS) • Input Impedance: 1M ohms • Output Impedance: 560 ohms • Power Requirements: DC 9V only, 250mA or greater • Requires isolated DC power supply •...
Need help?
Do you have a question about the SPACE FORCE REVEBERATION LEAP Series and is the answer not in the manual?
Questions and answers