Table of Contents
Related Manuals for OHAUS e-G71HS10C
Summarization of Contents
1. Introduction
1.1. Safety Information
Safety notes and symbols indicating potential hazards.
1.2. Intended Use
Specifies the intended application for the Ohaus Hotplate-Stirrers.
1.5. Overview
1.5.1 Dimensions
Details physical specifications and dimensions for the Round Top Hotplate-Stirrer.
1.5.2 Device Setup
Identifies and describes the various components and controls of the unit.
1.5.3 Display (All Units)
Explains the meaning of various icons and indicators on the unit's display screen.
2. Operation
2.1 Getting Ready
Steps to prepare the unit for operation, including power connection.
2.2 Standby Mode
Explains how to activate and the behavior of the unit in standby mode.
2.3 Controlling the Stirrer
Instructions on how to operate and adjust the stirring speed and functions.
2.4 Controlling the Top Plate Heater
Guide on operating and adjusting the heating temperature and related features.
2.5 Controlling the Timer
Instructions for setting and managing the timer functions for heating and stirring.
2.6 Using the External Probe
Details on connecting and using the external temperature probe for precise control.
2.7 The Settings Menu
Provides access to various configurable settings and features of the unit.
2.8 Using the SmartHeat™ Feature
Explains how to adjust the maximum temperature limit of the heater.
2.9 Creating a User Program
Guide on creating and formatting text files for user-defined operational programs.
2.10 Loading a User Program
Instructions for loading user programs from a USB storage device.
2.11 Using the SmartRate™ Feature
Describes how to control heating and stirring ramp rates using icons.
2.12 Using the SmartPresence™ Feature
Explains the safety feature that turns off the heater if the unit is unattended.
2.13 Using the SmartLink™ Feature
Details the optional safety feature for remote monitoring and control via Bluetooth.
2.14 Using the Single Point Calibration Feature
Instructions for calibrating the heater's accuracy at specific temperature points.
2.15 Enabling / Disabling the Beeper
How to turn the unit's audible alerts on or off.
2.16 Changing the Timer Start Setting
Configures when the timer begins counting in countdown mode.
2.17 Changing the Power Recovery Setting
Configures automatic restart of functions after power interruption.
2.18 Reset to Factory Default Settings
Procedure to restore the unit to its original factory settings.
3. Maintenance
3.1 Troubleshooting
Lists common problems, their causes, and suggested solutions.
3.2 Service Information
Contact information for technical support and service agents.
Need help?
Do you have a question about the e-G71HS10C and is the answer not in the manual?
Questions and answers